Categories
Cruising Other Motorcycle Blogs

7 Reasons The HighPipe Motorcycle Festival Should Be On Your Calendar

The second annual HighPipe Festival is less than 2 weeks away, so break out the goggles and get ready to scramble

The HighPipe Motorcycle Festival is an all-inclusive event open to all street-legal motorcycles and riders of all skill levels. And it’s almost here!
Categories
BikeExif CB750 cafe racer Custom Motorcycles Honda cafe racer Honda CB750 Honda CBX Honda motorcycles Other Motorcycle Blogs

Mixology: A Honda cafe with two engines blended into one

A Honda cafe racer with the best of two engines blended into one
‘Perfectly insane about motorcycles’ is how friends and colleagues describe Nazar ‘Gazzz’ Poznyakovsky of Gazzz Garage in Kiev, Ukraine.

“I combine engineering and artistry,” says Nazar. “I work out everything from general plans to the smallest details from both engineering and artistic points of view.”

A Honda cafe racer with the best of two engines blended into one
With that much control over every step of the process, Nazar has a reputation as a detail-obsessed майстер на всі руки (Jack-of-all-trades). And he’ll stop at nothing to execute his vision for a project.

Case in point is his latest achievement, a beautifully remixed CB750 with class, artistry, detail, and power.

A Honda cafe racer with the best of two engines blended into one
“I wanted to make a cafe racer with a soul-stirring sound and head-turning looks,” Nazar says of his ‘CB815.’ That’s a tall order for a rather common platform, but Gazzz was up to the challenge. “In the tradition of Gazzz Garage, not much remained of the original bike.”

The front forks, the lower triple tree, the front of the frame and some engine parts are all that stayed from the donor.

A Honda cafe racer with the best of two engines blended into one
The engine is a masterful hybrid of the classic CB750 mill and its more powerful but problematic ancestor, the CBX750. “The CBX creates an additional 20hp and 9Nm at the crankshaft, but the oil system frequently caused rods to be thrown through the case,” says Nazar.

“This and other issues were completely solved in the CB750 engine, so I decided to take best of both engines”.

A Honda cafe racer with the best of two engines blended into one
By combining the two, Nazar wrought a new heart with a six-speed gearbox, a hydraulic drive clutch, a better crankshaft, case, and oil system, and a cylinder head with larger valves and performance cams.

But he didn’t stop there.

A Honda cafe racer with the best of two engines blended into one
“Big bore piston kits for the CBX750 do not exist, so I worked out my own solution,” he says. After some fettling, the cylinder barrels were bored 3mm over original and Nazar replaced the piston rods to hold compression as high as original. “I suppose I was first who performed it, and in this way I got an 815ccm engine with the best features of the CB and CBX engines!”

To finish off the performance mods, Nazar ported and polished the heads, and made a stainless steel intake system. Re-jetted carbs breathe through Kijima pod filters, and a 4-into-4 exhaust provides the “soul-catching” growl and bark.

A Honda cafe racer with the best of two engines blended into one
With the power plant settled, Nazar developed artfully engineered details that set this CB750 apart from its counterparts. “More power, less weight, perfectly working suspension and brakes, eye catching appearance: those were my goals.”

At the top, Nazar replaced the CB750 tank with one from its odd-duck cousin, the CX500. After treating the tank to custom paint, Nazar fitted a new cap with a modified lock and a Moto Guzzi fuel petcock.

A Honda cafe racer with the best of two engines blended into one
Moving forward, Nazar sourced an upper triple clamp from a 750 Nighthawk that was more suitable for clip-ons—while retaining the original 41mm fork tubes with preload adjusters.

“The Nighthawk has a two-holed mount for the handlebars, so I decided that I should use them. I machined them a bit and used the right hole to install a T&T analog clock and the left hole for a side stand indicator.”

A Honda cafe racer with the best of two engines blended into one
Completing the cockpit is a T&T ‘all-in-one’ dashboard and a T&T oil temperature gauge, sitting behind an 8-inch British style headlamp flanked by custom made LED turn signals.

Attached to the front forks is a custom front hub. It’s mated to a Warp9 17 x 2.5 rim with custom made spokes, with a Dunlop K375 tire sweetly hugged by a custom made steel mudguard.

A Honda cafe racer with the best of two engines blended into one
Front braking is provided by twin 300mm discs with Nissin dual piston calipers attached to a Kawasaki Vulcan 1500 master cylinder, by way of Hel braided brake lines.

The rider now sits on a custom seat (and aluminum pan) fabricated by Nazar. Underneath is an aluminum swingarm from a Kawasaki Zephyr 750, and between the rails is a Honda Translap 650 rear hub.

A Honda cafe racer with the best of two engines blended into one
This time, the Warp9 wheel is 17 x 4.25 and shod with a chunky 160/70-17 Bridgestone G528 tire. Keeping everything in place are Kayaba fully adjustable rear shocks with custom made adjusters.

This CB750 is a good 20 kilos lighter than the source bike, and details are plentiful—right down to the custom footpegs and chain guard.

A Honda cafe racer with the best of two engines blended into one
As a one-man shop, Nazar is undaunted by the unknown. And he’s brought to life a beautiful vision, despite living in a part of the world where parts availability is, at best, challenging.

Astounding work from the madman in Kiev.

Gazzz Garage | Images by Nazar Poznyakovsky

A Honda cafe racer with the best of two engines blended into one

Categories
Best Modular Helmets Gear Brands Gear Reviews Modular Helmet Reviews Motorcycle Helmet Reviews Other Motorcycle Blogs review Shoei Web Bike World

Shoei Neotec II w/ SENA SRL Hands-On Review

wBW readers and fans of modular helmets everywhere will note that the original Shoei Neotec was introduced in 2012, and since its introduction it has rightfully earned and maintained its reputation as one of the best modular helmets around. In fact, earlier this year we selected it for our recommended modular helmets guide.

The Neotec gave riders exactly what they would have expected from a premium modular produced by a top-class brand like Shoei: exceptional build, great ventilation, an internal sun visor, and good ergonomics.

An act like that is tough to follow.

Still, the Neotec II does so with experienced confidence and easily earns a place as one of the segment leaders.

Shoei Neotec II

The Neotec II is new for this year, and while it’s easy to assume that it’s an evolution of the aging Neotec, most of the helmet has been rethought or upgraded. According to Shoei, the Neotec II is quieter, more comfortable, and features improved aerodynamics. You can (and should) reference our original Neotec review for comparison purposes as I don’t have an original Neotec handy for proper side by side.

Pricing for the Neotec II ranges, from $699 for single-color to $799 for something with graphics.

After a few weeks of riding, these are my thoughts on the Matte Deep Grey Shoei Neotec II.

Shopping Now? We Recommend:

webBikeWorld has worked closely with RevZilla over the years to provide our testers with products to review. In addition to being a great site to shop from, they’re also a great partner.

RevZilla

Free shipping on orders over $40
30-day no-nonsense return policy
Excellent selection of all major brands
Awesome pricing

Buy This Helmet on RevZilla

Amazon

Free shipping (with Amazon Prime)
30-day return policy
Excellent selection
Competitive pricing

Buy This Helmet on Amazon

Exterior Appearance & Finishing

Shoei Neotec II

From an aesthetic perspective, the matte finish on the tester I have here looks great. As you would expect from Shoei, the finish is top-notch. You won’t find any eggshelling, wraps at the seams, or variations in the color. The finish is even and uniform on every surface of the helmet.

The only splash of color on this colorway is the orangey-red chinbar release lever. Otherwise, it’s monochrome all around.

Compared to the original Neotec, the updated version is sleeker, with fewer lines and edges to disrupt them. Notably, the “forehead” partition is gone, and the upper vent is more distinct – looking a bit like a hood scoop – while the rest of the helmet is smoothly contoured and finished.

Other visual differences between the two:

  • The chin vent is black and noticeably smaller compared to the color-matched vent on the Neotec
  • The rear of the helmet is again streamlined, with the curve from front to back extending somewhat lower than the original
  • The rear vent is more stylized, better flowing with the lines of the hemet

Personally, I think the Neotec II looks significantly better than the Neotec (which itself wasn’t a bad looking helmet).

Colorways

Shoei Neotec II Colorways

You can get the Neotec II in eight solid colors and three graphic versions. The solid colors are black, white, matte black, anthracite metallic, matte deep grey, light silver, matte blue metallic, and wine red.

Shoei Neotec II Excursion Colorways

The graphic versions are the Excursion TC-3 (yellow), Excursion TC-5 (grey/red/black), and Excursion TC-6 (white/red/black).

Finishing Quality

Shoei Neotec II Matte Finish Scuff

As mentioned earlier, the quality of the paint is quite good. It’s uniform throughout. However, the matte deep grey version I have here is already showing some blemishes.

I managed to scuff the paint doing I’m not sure what, as I haven’t dropped the helmet or hit anything that I’m aware of.  A layer of clear coat may have prevented the scuff in question, but I suppose I’ll never know what caused it in the first place. Bummer.

Matte finishes are notorious for being more fragile than their clear-coated compatriots, so it’s hard to be more than a touch frustrated over the appearance of the white mark on the chinbar. Considering the light use the helmet had received up until that point – with barely 150km of seat time in it – I’m concerned that longevity of this colorway may be an issue.

The Neotec II will get plenty of use this summer, so I’ll post an update at the end of September and see how the finish has held up.

Fit & Comfort

Shoei Neotec II

The Neotec II fits a little snug. In his original Neotec review, Rick commented that the interior shape was “neutral to a T”, and I’d have to say the same thing about its predecessor. Most people will find the Neotec II comfortable to wear.

I haven’t noticed any pressure points while wearing it. It wraps firmly around my head and chin, but not to the point that it is uncomfortable. The helmet feels secure, moving and staying in position with my head as I rock my head backward and forward, left to right.

With the SRL integrated, the Neotec II weighs 4.2lbs, which is near the bottom of our 272 helmet comparison… and nearly right on top of the original Neotec.

Airflow & Venting

The chinbar vent is dual purpose: it brings airflow into the helmet to keep you cool, and it also keeps the visor free of fog. I haven’t had the ability to ride the Neotec II in wet weather (yet, Calgary is living in a drought at the moment), so I’m unsure of how changes in humidity would impact the system’s effectiveness. I will update the review when I have an opportunity.

The air brought in from the chin vent is directed towards the exhaust port – locked open. The top vent also routes via the exhaust. The chin vent is either open or closed, but the crown vent has three positions: open, somewhat open, and closed. With the vents closed there is a small but tangible reduction in road noise.

Pleasantly, air from the chin vent does not land directly on the eyes and avoids eye irritation- something I’ve experienced with other helmets.

Micro-Ratchet Strap

Shoei is using a micro-ratchet strap on the Neotec II. Unfortunately, I was never able to get the micro-ratchet strap as comfortable as I’d like. As a result, it always sort of pressed into my neck whenever I was looking down. At first I thought it was how I had it set up, and so I tried reconfiguring the lead given to mechanism, but I was only able to make it less uncomfortable as opposed to eliminating the discomfort entirely.

This is the only downer to the Neotec II. If this were a double-D ring I don’t doubt that it’d be perfectly comfortable. As it is, the micro-ratchet strap is an annoying but tolerable pain in the neck.

Also worth noting is that, so far, I’m the only person that’s tried it on to express said discomfort. Perhaps I’m an anomaly?

Fit

The rest of the helmet fits like a glove, as I’ve mentioned already. I can wear the Neotec II a long time without feeling neck fatigue, in part because the interior comfort system does an excellent job managing pressure.

The fit is unchanged with the addition of the SRL- the earpieces and microphone blend right into the overall design of the helmet and do not intrude in any way.

Noise

What really impresses me about the Neotec II is how quiet it is. It’s quite good for a modular.

The liner seals firmly against your head and chin, and the liner and interior comfort system work well together to keep unwanted sounds and vibrations out. There’s no whistling at speed, though wind buffeting is noticable (as it is on any helmet). Compared to the Vemar Sharki I reviewed last month, the Neotec II is considerably quieter inside.

RevZilla

Free shipping on orders over $40
30-day no-nonsense return policy
Excellent selection of all major brands
Awesome pricing

Buy This Helmet on RevZilla

Amazon

Free shipping (with Amazon Prime)
30-day return policy
Excellent selection
Competitive pricing

Buy This Helmet on Amazon

Visibility

Shoei Neotec II

The viewport on the Neotec II is functionally identical to the original; the Neotec II is perfectly fine with respect to visibility, granting its wearer an expansive field of view. I do not feel my visibility while wearing it is at all restricted, and that extends well into my peripheral vision as well.

Face Shield

The face shield – the CNS-3 – is UV blocking and is a high-quality piece overall. It moves throughout its range of motion smoothly and feels secure doing it.

Optics are also quite good, with minimal distortion or haze that I can discern. Fact is, it’s a solid piece that does its job. You won’t notice that it’s there, which is kind of the point.

Pinlock Visor

A Pinlock EVO visor is included if you want to add it to the face shield.

Integrated Sun Visor

Shoei Neotec II

The built-on QSV-1 sun shield is one smooth operator. The left-side mounted slider – in the same spot and of the same design as the original Neotec – slides easily, with no sticking. Near the top of the range it will stay in whatever setting you leave it in, or it will snap to its uppermost position.

The visor provides ample sun protection, with 90% of the visible area shaded. Only about a fifth of my vision – the bottom left/right periphery – is unshielded.

In-Helmet Audio & Communication Via the SENA SRL

Shoei Neotec II & SENA SRL

Both SENA and Shoei have been marketing the integration of the SRL for the Neotec II quite heavily. The system is designed to integrate seamlessly into the Neotec II, offering an aesthetically-pleasing way to listen to music, take calls, or use your smartphone’s navigation.

The SRL has a lot of functionality and shortcuts to learn- I’ll go into more depth in its dedicated review. Here, I’ll touch on how it works with the Neotec II.

Installation Tips

Shoei Neotec II & SENA SRL

Installation of the system is easy – taking about 10-15 minutes the first time you do it – and the finished product looks great.

As the SRL is designed for the Neotec, the buttons look as if they always came with the helmet. There are no bulky control units on the side of the helmet, or any other visual indicator (aside from the microphone) that you’ve installed anything at all.

SENA has a handy installation video that makes the installation process a snap. I recommend following it vs. floundering about yourself.

Using the SRL

SENA SRL Buttons on Shoei Neotec II

The left-side mounted buttons are easy to operate, though the process is somewhat clunky with gloves. SENA has various voice commands built-in; you simple say “hello, SENA” to get the AI-party started.

I prefer a more tactile approach and was able to learn the three-buttons positioning on the Neotec II quickly. The result is a system that is very intuitive to use when making simple adjustments, such as raising/lowering the volume or taking incoming calls.

Speaking of taking incoming calls, it’s a one-touch gesture to do so: when your phone rings, pressing the center button on the SRL will answer the call.

One thing to note: the pairing process is less intuitive than you’d think when looking at the quick guide.

  • The guide calls for you to hold the center button for 12 seconds. After about 10 seconds, the intercom will announce pairing mode.
  • Continue holding the center button for another 2 seconds, at which point the intercom will announce configuration menu.
  • At that point, press the + button and the helmet goes into phone pairing mode.

I must have spent 10 minutes trying to get the helmet to pair before I discovered that “pairing mode” isn’t actually the mode to be in if you want to pair your phone.

Sound & Microphone Quality

Shoei Neotec II & SENA SRL

Once you have everything paired up, using the SRL via your phone is like any other Bluetooth speaker/headset. The SENA Utility app allows you to configure the various settings of your SRL (things like audio compensation, multitasking, etc.).

Sound quality of both streaming audio/navigation and phone calls is pretty good. Calls are mostly clear at city speeds, and the person on the other end will hear you. Most people I talked to were genuinely surprised when I told them I was doing 30 – 50 mph on my motorcycle.

Streaming audio sounded surprisingly good considering the background noise of the bike, wind, traffic, etc.. The Neotec II is well-sealed with minimal air flow through the chinbar and visor port, the result of which is a good environment for in-helmet audio.

Well, as good of an environment as in-helmet audio gets, anyway.

However, at highway speeds, buffeting against the helmet drowns out the audio from the SRL at all but the highest volumes. Tucking into the slipstream improves this noticeably, and at city speeds, the audio quality is acceptable. You lose most bass tones when you’re moving quickly, but that is also true of any in-helmet intercom system.

Negative experiences with the SRL are limited to small things:

  • There were a few instances where my phone lost connection with the helmet, once requiring me to pull over and re-pair the SRL to my Galaxy S8. The re-pairing situation only happaned once in the two-dozen drips or so I used it on.
  • The SRL mouthpiece is always in place and sometimes it gets in the way. The chin protector often hits the microphone while being raised and lowered.

Overall, SENA’s SRL is the obvious companion to the Neotec II. It’s easy to install and asks for no aesthetic tradeoff. It sounds good and enhances the ride.

In Conclusion, the Neotec II is a Comfortable & Feature Rich Flip-Up Helmet

Shoei Neotec II on a Yamaha FZ-6 Fazer

When your floor price is $699, it’s reasonable to have high standards. That’s a fair investment in your comfort and safety, and for that money, the Neotec II doesn’t disappoint.

Long-term durability of the finish may not be the best, but that’s also somewhat expected from a matte colorway. I’ll post an update at the end of the season to see how the finish has weathered.

All told, Shoei put out a truly excellent helmet in the new Neotec that offers its wearer the best in modular design and technology. It is a high-quality package that riders will enjoy and requires few compromises. The notable caveat here is the micro-ratchet strap, which is better than it was when I first got it but not as comfortable as the typical double-D (for me, anyway).

It’s price competitive with modular segment leaders and will be good option for a lot of riders. If you are currently shopping for a Klim TK1200, SCHUBERTH C4 or C3 Pro, then the Neotec II should also be on your list.

Disclosure: Shoei and SENA provided the Neotec II/SRL free of charge for my review.

Pros

  • Excellent design and aesthetics
  • Great build quality
  • Seamless integration with SENA SRL
  • Sound levels while riding are good
  • Interior comfort system/liner is really good

Cons

  • Matte finish gets marked fairly easily
  • Micro-ratchet strap is not as comfortable as I’d have thought

Specs

  • Manufacturer: Shoei
  • Price (When Tested): $699
  • Made In: Japan
  • Alternative models & colors: Numerous colorways (see above)
  • Sizes: XS – XXL
  • Size chart: On this page
  • Safety designations: DOT Approved, DMVSS 218 Standard
  • Review Date: June 2018

RevZilla

Free shipping on orders over $40
30-day no-nonsense return policy
Excellent selection of all major brands
Awesome pricing

Buy This Helmet on RevZilla

Amazon

Free shipping (with Amazon Prime)
30-day return policy
Excellent selection
Competitive pricing

Buy This Helmet on Amazon

Shoei Neotec II Image Gallery

The post Shoei Neotec II w/ SENA SRL Hands-On Review appeared first on Web Bike World.