Categories
BikeExif Custom Motorcycles Honda motorcycles Honda scrambler Maria Motorcycles Other Motorcycle Blogs scrambler

Kalahari: A custom Africa Twin from Maria Motorcycles

Africa Twin adventure sports custom by Maria Motorcycles
The Honda XRV750 Africa Twin is almost thirty years old, and fast approaching legend status. So most Honda fanatics will probably baulk at the thought of customizing one.

Luis Correia and his crew at Maria Motorcycles weren’t keen to cut into their client’s 1992 Africa Twin either. But it wasn’t just down to reverence for the adventure sports icon.

Africa Twin adventure sports custom by Maria Motorcycles
“We accepted reluctantly,” Luis explains, “because a bike like this is not a walk in the park to make. There are lots of limitations when dealing with liquid-cooled bikes: we usually have a lot of parts to hide and to get off the bike.”

Plus, the recently acquired Africa Twin was in a pretty terrible condition. So the Portuguese crew stripped it down without too much remorse, and set about transforming it. “The idea was to make an old Dakar dirt bike,” says Luis.

Africa Twin adventure sports custom by Maria Motorcycles
But first, the Maria team had to bring the V-twin motor back up to scratch. So they cracked it open, checked it thoroughly, and replaced everything that wasn’t in good condition. They stripped off the ageing engine paint too—and left it as a mix of raw and polished finishes.

“With this touch,” says Luis, “the engine looks like it’s from a classic bike from the 70s.”

Africa Twin adventure sports custom by Maria Motorcycles
Maria also refurbished the 43mm front forks, and stiffened and lowered them. The Pro-Link rear suspension was upgraded with a new shock. Then the wheels were rebuilt with stainless steel spokes and nipples, and a new 19” front rim installed—two sizes down from the 21” stocker.

Just about all the Africa Twin’s bodywork is gone now, save for its fuel tank. Maria kept it, but modified it extensively—removing the original fairing mounts, and reshaping it.

Africa Twin adventure sports custom by Maria Motorcycles
Behind the tank is a custom-built seat, covered in brown leather. It’s sitting on an equally custom new subframe, with an aluminum electronics tray sitting underneath.

Maria also built a pair of aluminum fenders, and a set of crash bars—to protect the tank and motor when things get awkward in the dirt.

Africa Twin adventure sports custom by Maria Motorcycles
Despite the robust aesthetic, there’s some really neat packaging going on. The rear fender tucks up perfectly against the battery box, and there’s an additional fender lower down to keep things properly clean. (The passenger footrests have even been re-mounted on one-off removable brackets.)

The taillight is tucked away underneath the upper fender, and there are discreet LED turn signals all round. The license plate’s mounted on a hand-made bracket behind the wheel, and features its own plate light, to keep the law at bay.

Africa Twin adventure sports custom by Maria Motorcycles
Maria also tweaked the wiring, installed a Lithium-ion battery, and fitted a new ignition under the seat. The airbox is gone, and the Honda now breathes through a pair of pod filters.

At their client’s request, they also built a set of stainless steel exhaust headers to the exact same design as the OEM numbers, flowing into a Danmoto muffler.

Africa Twin adventure sports custom by Maria Motorcycles
In the cockpit, Maria have installed new handlebars from Renthal, along with new switches, grips and mirrors. There’s also a new headlight and speedo.

Every last inch of the Africa Twin’s been cleaned up, replaced or refreshed. There are new radiator hoses, brake discs and Hel brake lines. And any part that needed it was either powder coated, or zinc plated.

Africa Twin adventure sports custom by Maria Motorcycles
It’s now wrapped in a typically tasteful color scheme; something we’ve come to expect from Maria. This once-hefty dual-sport is now a stripped back scrambler—an oversized, street-ready enduro of sorts. What’s more, it’s also in a much better state than it was…

“The bike runs perfect,” says Luis, “like it was when new!”

Africa Twin adventure sports custom by Maria Motorcycles
“It starts always and doesn’t have any problems of any kind—proving that this was always a bike with lots of reliability. It’s fun to drive, even off road, and the stiffer suspension and smaller wheel at the front make it even better for city driving.”

Maria have called the Africa Twin ‘Kalahari,’ as a tribute to one of the continent’s driest deserts.

Which is exactly where we’d love to take it, given half a chance.

Maria Motorcycles website | Facebook | Instagram

Africa Twin adventure sports custom by Maria Motorcycles

Categories
BikeExif Custom Motorcycles Maria Motorcycles Other Motorcycle Blogs Yamaha motorcycles Yamaha XS650

No Excess: A supremely elegant XS650 from Portugal

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
Can you believe
the Yamaha XS650 is half a century old this year? The air-cooled parallel twin has always had a strong fan base, and Maria Motorcycles of Lisbon, Portugal love it as much as anyone. Their first build was an XS, and they’ve been smitten ever since.

So it’s not surprising that the Maria guys hoarded a low mileage 1980 XS650, waiting for the right project. And inevitably, a client came along and convinced them to customize it for him.

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
“We wanted a simple and elegant bike,” Maria’s Luis Correia tells us, “without too many overdone parts or extras. Our job was simply to restore it, and make it as-new and unique.”

The donor was mechanically in tiptop shape—so the crew didn’t need to crack the engine open. It was running perfectly smooth, so they cleaned it up and repainted the covers black.

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
The rest of the bike was stripped right down and rebuilt with new bearings, seals and stainless steel fasteners throughout. Maria kept the original suspension and brakes (even the original discs, which have plenty of wear left on them), but refurbished and serviced them.

They also powder coated the frame, wheels and any other parts that needed a refresh. The frame’s been shortened and looped at the rear, and the tail light and plate relocated to the left side.

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
There’s a custom-made leather saddle up top, and a one-off aluminum electrical box underneath. Maria repackaged all the wiring to fit in there, along with a small Lithium-ion battery. The airbox is gone, replaced by a pair of K&N cone filters.

Moving to the cockpit, the team switched the bars out for a laid-back set from LSL, and ditched all the stock switches. The bars now wear mini-switches, classic Posh grips and new levers with a Magura master brake cylinder.

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
Just in front is a simple analog speedo and a small round light. And the guys have taken the time to fit smaller bits like upgraded plug leads and HEL performance brake lines.

Then there’s the exhaust; a high-riding twin muffler system, hand-made by Maria. “We know that the muffler position is something controversial,” says Luis, “as some of the comments we received. But of course we tested it and it’s pretty far from the rider! This bike is made for one single person, as requested by the new owner.”

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
That exhaust’s earned the XS650 the nickname ‘Zagalote.’ “It’s a Portuguese word for a very powerful bullet used in shotguns,” explains Luis. “We choose that name inspired by the pipes pointed in the air like cannons!”

We’ve always known Maria Motorcycles to be masters of good taste, and Zagalote is a perfect example. There’s nothing out of place here, and nothing that’s not needed, to the point that the Firestone Deluxe Champion tires fit right in. And as we’ve come to expect from this crew, the paint job is sublime; a simple green with white accents, repeated on the headlight.

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
It’s a bittersweet result for the guys though, since they don’t get to keep this one. “We’re jealous of the new owner,” says Luis. “The Yamaha XS650 is one of the best bikes to work with, and it has lots of character.”

“A XS650 was the first bike we built, so this one brought back some old memories from the beginning.”

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal
“The bike is lovely to ride, so smooth and perfect. It starts first time and the engine works like a new one. The pipes make a beautiful bass sound. It’s not a exhibition bike at all—we would ride it everywhere.”

So would we. Here’s to another 50 years of XS650.

Maria Motorcycles website | Facebook | Instagram

No Excess: A supremely elegant XS650 from Maria Motorcycles in Portugal

Categories
BikeExif Custom Motorcycles Maria Motorcycles Other Motorcycle Blogs scrambler Yamaha motorcycles Yamaha XSR700 Yamaha Yard Built

The Orbiter: A scrambled XSR700 from Maria Motorcycles

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
In two weeks, Yamaha will go public with a new adventure bike—a production version of the T7 concept that a small group of European journalists tested back in June. Why’s that relevant? Because it’ll be powered by the same 689cc, parallel-twin motor as the XSR700.

We can argue about the looks of the XSR until the cows come home, but everyone agrees that the engine is a gem. It’s punchy and predictable—making it just the ticket for a mid-sized dual-sport. The crew at Maria Motorcycles agree: after taking the XSR700 for a spin they fell in love, then turned it into the jolly mud-flinger you see here.

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
The seed was planted just over a year ago, at the Art & Moto event in Portugal. Maria Motorcycles ran into Yamaha’s marketing director, and asked him if they could try the XSR700 out. “It was a new bike at the time,” says Maria’s Luis Correia, “and we always like to try new bikes to have a diverse experience, and with that, more technical knowledge.”

“It was a 50km run with many curves and a very technical track, and it was really surprising how agile and fast it was for a entry level bike. A really fun bike to have—and perhaps to modify—those were our thoughts!”

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
Fast-forward to this year, and an invitation to build a Yard Built XSR700 arrived from Yamaha Portugal. Despite having just four months to complete it—and ten other projects on the board—the Lisboetas accepted the challenge.

Right off the bat, the guys wanted to steer the XSR far away from its original DNA, by building either a racer or an aggressive off-roader for solo adventures. They pitched both ideas to Yamaha, who settled for the scrambler treatment.

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
“Our idea was a concept bike to have fun on off-road tracks with,” says Luis. “Like a moon bike—something to ride unexplored fields and territories. The name ‘The Orbiter’ was something that came from that; a space vehicle mixed with a flat track race bike!”

Maria kicked things off by ditching the XSR’s stock bodywork, then designed a new tank and tail piece to replace it. They ended up shaping a monocoque aluminum unit, figuring it would be quicker than building two separate pieces. The stock XSR tank is actually a steel fuel cell under aluminum covers, but this new setup has replaced the entire arrangement—so Maria had to include the original fuel pump too.

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
Mounting it was also a challenge; part of the Yard Built mandate is that all changes are plug and play, with no cutting. So they unbolted the XSR’s removable rear frame section, and set their new bodywork up to mount to existing tabs (the whole thing attaches via three fasteners).

It’s capped off with a combination of leather and Alcantara—chosen for its anti-slip properties—on the seat.

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
The front end’s new too, borrowed from a Yamaha MT-09. So the XSR gets longer, inverted forks, new triple trees, and radial brakes with more bite. Maria ditched the stock ABS system, since it’s basically useless in the dirt.

The cockpit’s equally ‘scrambler,’ with Renthal Twinwall bars, Renthal grips, LSL levers and no speedo. The turn signals are barely visible numbers from Motogadget. For a headlight, Maria fitted the smallest Bates-style light they could, while still maintaining some practicality.

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
“Our idea at that point was to have almost no light at the front,” explains Luis, “to become more aggressive and large to the eye. The same with the front fender. For us it made sense to give it a very special look, since this part would get much attention in the overall design.”

The wheels are a pair of swish Kineo spoked tubeless items, with a bump in size up front to 19 inches. And the tires are Michelin’s aggressive Anakee Wild dual-sport rubber.

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
The twin exhausts are one-offs, crafted from stainless steel, and treated to just enough pipe wrap to prevent leg burns. The XSR’s also sporting new radiator guards, blank-off plates where the passenger pegs used to mount, and number boards.

We’ve yet to see a Maria livery that hasn’t knocked our socks off, and The Orbiter is no exception. The monochrome base is a nod to spacecraft, while the hits of bright color draw inspiration from the racetrack.

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal
We’re sure the new Yamaha #adv bike is going to be a lot more modern and OEM than what Maria has produced here. But will it look better? We won’t have to wait long to see.

Maria Motorcycles website | Facebook | Instagram | Images by Giuseppe Conti

Yamaha XSR700 scrambler by Maria Motorcycles of Portugal

Categories
BikeExif Custom Motorcycles Ducati Ducati Pantah Maria Motorcycles Other Motorcycle Blogs

Road Runner: A Ducati Pantah reborn in Portugal

Road Runner: A Ducati Pantah reborn in Portugal
The Pantah is one of those bikes from the 1980s that looks a little awkward today. But let’s not be too unkind: It set the template for modern Ducatis, with a trellis frame, belt-driven cams and a desmo valve system.

From an engineering perspective, you could say that Fabio Taglioni’s swansong was also his finest hour. So we’re always pleased to see a custom builder do justice to the famous engineer’s work.

Road Runner: A Ducati Pantah reborn in Portugal
In this case, it’s Maria Motorcycles of Lisbon. “A client came to us with a bike that he bought in the UK, completely broken and missing most of the original parts,” says shop boss Luis Correia. “It was a Ducati Pantah 500—a difficult bike to find nowadays.”

“It wasn’t much more than a frame, wheels and an engine. We had no idea how long it had been in that state, but we accepted the project, and embraced as a real challenge.”

Road Runner: A Ducati Pantah reborn in Portugal
Maria’s client has a soft spot for vintage race bikes, so that became the theme. But first, Luis and crew had to figure out what to do with the engine.

Rather than scrap it, they sent it to one of Europe’s leading Ducati specialists, Ducati Technical Services of Wakefield in England. DTS is owned by Paul Klatkiewicz, a former racer, and he’s been rebuilding classic road and race Ducatis for 40 years.

Road Runner: A Ducati Pantah reborn in Portugal
“His machines are fast, light and reliable,” says Luis. “They’ve won awards at motorcycle shows and set lap records at many circuits. So we knew that he was the right man.”

Two months later, the engine returned to the Maria Motorcycles workshop. And for once, the tired old phrase ‘As good as new’ was appropriate. The Pantah now had a zero-kilometer engine, and a useful boost to 600cc, matching the upgrade Ducati made in 1981.

Road Runner: A Ducati Pantah reborn in Portugal
While the 90° V-twin was being rebuilt, Maria started working on the aesthetics—aiming for a vintage race vibe with a twist. “We thought it should be very exclusive and edgy, so we came up with the idea of gold, white and petrol blue.”

The frame was detabbed and smoothed over, with all unnecessary supports and brackets dumped in the bin. Then it was powder coated pure white.

Road Runner: A Ducati Pantah reborn in Portugal
The ideal tank would be an Imola-style old school aluminum tank. So Maria approached the Welsh company TAB II Classics, who made an Imola replica designed to fit the Pantah frame.

The fiberglass fairing is a modified off-the-shelf item, fettled to suit the design look, and with an asymmetrical headlight hole also added.

Road Runner: A Ducati Pantah reborn in Portugal
“We kept the original narrow wheels,” Luis points out, “because we had no interest in fitting large tires. Vintage race bikes have thin tires, so that´s we wanted.”

The front suspension is the original Marzocchi fitment. “The triple trees are beautiful old parts, so we decided to restore them as much as possible, and polish them.” The clip-ons are the original fitments too, but the shocks had disappeared—so Maria have installed a pair of Bitubos.

Road Runner: A Ducati Pantah reborn in Portugal
Maria sculpted the tail unit in foam, and then made a single piece in fiberglass to match the fairing. The seat is covered in vintage-look leather to give a premium final touch.

The braking system has been completely overhauled, sandblasted and restored to as-new, with stainless steel Hel lines tightening up the response.

Road Runner: A Ducati Pantah reborn in Portugal
The electrical system was missing, so a new loom went on with a simple Motogadget speedo tucked behind the fairing and little more.

Most of the wiring is hidden under the frame tubes, and the lithium battery and major electric hardware is concealed under the tail unit.

Road Runner: A Ducati Pantah reborn in Portugal
Maria usually hand-make their own exhaust systems, in stainless steel—and with small welded-together segments rather than complete bends. It looks perfect here, topped off with a Spark muffler.

With modern cone filters on the intake side, Maria retuned the carbs to make the most of the blueprinted engine. The final touch is a leather belt that holds the tank to the frame, passing between two Monza gas caps.

Road Runner: A Ducati Pantah reborn in Portugal
“It’s an aggressive bike to ride,” says Luis, “due to the riding position, laid down on the tank. So it’s not a bike for the city. It’s a very good bike for highways and mountain roads though, for enjoying the curves and going through the gearbox.”

“It’s agile, light and fast. The old Ducati engines are a surprise when you ride them: Even an old bike like this has lots of torque.”

And lots of style too—an attribute sadly missing in many of today’s production machines, thanks to the ever-tightening noose of regulation. Kudos to Luis Correia and his crew for this delightful reminder of a bygone age.

Maria Motorcycles website | Facebook | Instagram

Road Runner: A Ducati Pantah reborn in Portugal

Categories
BikeExif BMW motorcycles BMW R100 Classic Motorcycles Maria Motorcycles Other Motorcycle Blogs

Salvage Job: Maria Motorcycles rescues a BMW R100 RS

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
Most custom motorcycles start out stock—blank canvases for builders to splash their ideas onto. And if they’re old, a little restoration work usually comes first.

But this 1980-model BMW R100 RS was in need of complete salvation when it landed on Maria Motorcycles‘ workbench. Before they could turn it into the handsome machine you see here, they had to undo some nasty ‘custom’ work.

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
“When our client bought the bike, it already had some changes,” explains Maria founder, Luis Correia. “It was really in bad condition, without fairings and more stripped.”

“We decided to divide the project into two stages: Stage One was to recover the most out of the original parts. Stage Two was to create a classic style that fit our client’s ideal.”

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
Once the Maria crew had torn the bike down, they started sorting through the stock parts worth keeping. Then they set about cleaning and polishing the aluminum bits—like the triple trees and carb covers.

“One crazy thing we did was to polish the wheels,” says Luis. “We’ve never seen a BMW with the wheels polished, and now we know why! Hours and hours of work, but we think it deserved.”

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
The bulk of the man-hours went into restoring the engine. Maria rebuilt it with a host of new parts, and also glass-blasted it—adding a clear coat afterwards to protect the metal and seal in the beautiful finish.

Their client’s love for old boxers stopped Maria from swapping out the tank for something smaller. But the rear-end of the bike has been reworked—with a custom-made subframe and a hand-covered sheepskin leather seat.

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
Underneath is a new electrics tray, containing a Lithium-ion battery and various components. “All the electrics were trash,” says Luis, “so we had to rebuild everything.”

The fenders are aluminum items, mounted on hand-made brackets. Mounting the rear fender using traditional stays rather than the subframe was a deliberate move, to keep the bike looking as classic as possible.

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
Maria tweaked the stance of the BMW R100 as well, by fitting new springs to lower the front forks. With new Bitubo shocks at the back, the ride is now much more controlled.

The tires are Diamond-patterned numbers from Coker—“Almost mandatory for this kind of bike,” Luis jokes. New front discs and Hel lines give the brakes a little more bite, while a pair of aftermarket mufflers improve the soundtrack.

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
The rest of the build is an exercise in tasteful parts selection: LSL handlebars, gum grips, new lighting and a Monza gas cap. LED turn signals and a tiny speedo are mounted on hand-made aluminum brackets, and mini-switches have their wiring hidden in the bars.

Every fastener has been polished or swapped out for a stainless steel replacement. As an added touch, Maria designed and laser cut various brass details to mount throughout the bike.

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
If there’s a defining feature to characterize a Maria bike, it’s the stunning paint designs. Luis explains this one: “Our idea was to mix petrol blue colors from old oil cans, and some white and gold to give a classy look. The simplicity of the lines were important, to minimize the overall heavy look that usually BMWs have.”

It works. This once-hacked airhead is now the sort of machine we’d pick for an elegant Sunday ride. Not that it’s a slouch—Luis tells us the mods have made for a lighter, more rideable bike.

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles
“It runs really smoothly, like a new bike. It’s really comfortable, and believe it or not, goes to almost 200 kph (124 mph). Amazing for a bike that’s almost 37 years old!”

Not bad at all. Now where did we put our Persols…

Maria Motorcycles website | Facebook | Instagram

Salvage Job: A BMW R100 RS rescued by Maria Motorcycles

Categories
BikeExif Custom Motorcycles Maria Motorcycles Other Motorcycle Blogs Triumph Bonneville Triumph motorcycles

Dirt Is Good: A rough and ready scrambler Triumph

Dirt Is Good: A rough and ready scrambler Triumph
Maria Motorcycles are known for wrapping their builds in exquisite liveries. But today’s offering wears little more than the original paint on its borrowed fuel tank.

It also has no turn signals, speedo, passenger pegs or front fender. That’s because it was built with one purpose in mind: to get dirty.

Dirt Is Good: A rough and ready scrambler Triumph
The owner is Maria’s founder, Luis Correia. Luis has had several dirt bikes in the past, and wanted to get back into off-road riding—so he hauled his 2005 model Triumph Bonneville onto the bench.

Dirt Is Good: A rough and ready scrambler Triumph
He chose to ditch the usual glossy Maria finish for three reasons:

“One is because I can fall as many times has I want, without being worried about damaging something. The other is because I’ve always wanted a bike with this look! And finally, because it was made with old parts that I had in stock.”

Dirt Is Good: A rough and ready scrambler Triumph
Luis has stiffened up the suspension, braced the front forks and specc’ed the wheels with Metzeler Karoo 3 tires. And most of the Triumph’s original body parts have been tossed, to bring the weight down.

Dirt Is Good: A rough and ready scrambler Triumph
Up top is a vintage Yamaha RD350 fuel tank, mounted as found. The subframe’s been chopped to the minimum, and supports a custom-made leather seat—arguably the neatest part on this self-proclaimed “rat bike.”

Dirt Is Good: A rough and ready scrambler Triumph
The Bonnie still has its airbox—upgraded with a K&N filter—while the carbs have been rejetted with a kit from Dynojet. The exhaust system’s a one-off, and the battery’s been replaced by two, lighter Lithium-ion items.

Along with tossing the clocks in the bin, Luis relocated the ignition and rectifier, and fitted a small headlight up front. The handlebars are from LSL, as is the front sprocket cover.

Dirt Is Good: A rough and ready scrambler Triumph
There’s a small aluminum fender at the rear to keep mud off Luis’ back, topped with a tiny tail light. And there are number boards at both sides (for racing, naturally).

Luis has already put his scrambler Triumph through its paces, and reports that it’s agile and aggressive. He’s christened it the Red Baron—“because it’s a war machine!”

Dirt Is Good: A rough and ready scrambler Triumph
And to those who would question the Bonneville’s ability off-road, he has one thing to say: “That’s just bullsh*t talking—the photos can speak for themselves!”

Maria Motorcycles website | Facebook | Instagram

Dirt Is Good: A rough and ready scrambler Triumph

Categories
BikeExif Custom Motorcycles Maria Motorcycles Other Motorcycle Blogs Yamaha motorcycles Yamaha XJR1300

Colossus: Maria’s mighty custom Yamaha XJR1300

Colossus: A mighty Yamaha XJR1300 from Portugal.
The XJR1300 is hot property right now, and it’s all Yamaha’s fault. First they reissued the iconic model line, and then fed it into the prolific Yard Built program. Interest in the four-cylinder brute has never been higher.

Custom XJRs of both the new and old variety are now streaming onto the interwebs. This is the latest one to hit our desks—an imposing ’99-spec machine from the Portuguese maestros at Maria Motorcycles.

Colossus: A mighty Yamaha XJR1300 from Portugal.
The bike was originally built up for Maria’s founder, Luis Correia. But when a new customer walked into the shop, plans quickly changed. “He fell in love with the massive look of the bike,” says Luis.

Even though work had already started, the new owner wanted something fresh—so he left it up to Maria to conceive a new design.

Colossus: A mighty Yamaha XJR1300 from Portugal.
The ‘Colossus’ project kicked off with a full tear down. Every part was re-painted, and the frame given a matte black treatment. And all the fasteners were swapped out for stainless steel items, with a few select bolts coated in zinc.

Maria liked the shape of the XJR’s stock fuel tank, but not its bulk. So they cut, sectioned and rejoined the tank, maintaining the same profile in a slimmer package that would further emphasis the size of the engine.

Colossus: A mighty Yamaha XJR1300 from Portugal.
A neat cut-and-loop set the subframe up for a custom-made nubuck and leather seat. The client wanted to retain two-up functionality, so the passenger pegs are still in place—and Maria built a second seat that can be swapped out.

Under the seat unit is a custom-made electronics tray. It hosts the ignition, a pair of Lithium-ion batteries and a Motogadget m-Unit controller (around which the bike’s been rewired).

Colossus: A mighty Yamaha XJR1300 from Portugal.
The carbs have been treated to a Dynojet kit and a set of K&N filters. But it’s the beefy, yet intricate, four-into-four exhaust system that steals the show.

There are plenty of nice off-the-shelf parts too. The wheels are 17-inch Kineo tubeless units, wrapped in grippy Continental ContiRoad Attack rubber. A Renthal chain and sprockets transmit the power to the back wheel, and the front forks have been upgraded with heavier oil and Öhlins springs.

Colossus: A mighty Yamaha XJR1300 from Portugal.
The rear turn signals, bar-end turn signals, grips and switches are all from Motogadget. The speedo’s sitting on an aluminum bracket, designed to utilize the original handlebar clamp mounting points. The cockpit’s finished off with LSL clip-ons.

Colossus: A mighty Yamaha XJR1300 from Portugal.
Up front is a vintage Harley headlight, with a LED taillight tucked away under the rear frame hoop. The front fender is a hand-made piece.

As with all Maria builds, the paint is exemplary: slick and well thought out, right down to the last detail. (Note the valve covers and the carb tops).

Colossus: A mighty Yamaha XJR1300 from Portugal.
With elegant lines and impeccable finishes, Colossus is both a little classy and a little frightening.

“The bike has become very light and agile, since we’ve removed many of the original parts,” Luis says. “It runs really smoothly at low speeds—but when you turn the throttle it gets really scary!”

Where do we sign up?

Maria Motorcycles website | Facebook | Instagram

Colossus: A mighty Yamaha XJR1300 from Portugal.

Categories
BikeExif Custom Motorcycles Ducati Ducati SportClassic Maria Motorcycles Other Motorcycle Blogs

Bloody Fang: A track-ready Ducati GT 1000

Track Day Teaser: custom Ducati GT 1000 by Maria Motorcycles.
Ducati hit a home run with the GT 1000 as far as we’re concerned. Essentially a factory café racer, it had a classic vibe that belied just how quick it was.

Mysteriously, the sales numbers didn’t add up, and it was eventually dropped from Ducati’s line-up. Finding one today is tricky—and improving on its out-the-box good looks is even tougher. Luckily the Portuguese outfit Maria Motorcycles has an eye for good lines, and a penchant for eye-catching liveries.

Track Day Teaser: custom Ducati GT 1000 by Maria Motorcycles.
Maria’s client had managed to get his hands on a barely-ridden GT 1000, and wanted it transformed into something more at home on the track. The idea was to give the bike an aggressive look to match its performance—and to add a few, carefully selected tech upgrades.

The guys sourced a fairing and tail combo from the US. Then they got lucky: a friend was selling some GT 1000 Paul Smart parts, including a tank and fairing bracket. With some tweaking, everything was eventually pieced together and capped off with a hand-made seat.

Track Day Teaser: custom Ducati GT 1000 by Maria Motorcycles.
Maria kept the GT’s original side covers and front fender, modifying the latter for a neater look. The only changes behind the fairing were a set of clip-ons and grips from LSL, and the stock foot controls were tidied up a little.

At the client’s request, the GT 1000 was intentionally stripped of its mirrors and lighting. “To minimize problems with the authorities,” says Maria’s Luis Correia, “we installed a small fog light in the fairing. It didn’t compromise the look of the bike, and it even gave it a more aggressive look.”

Track Day Teaser: custom Ducati GT 1000 by Maria Motorcycles.
On the performance front, Maria added a complete two-into-one Termignoni system, and had the ECU remapped by Pietro Gianesin of Supertwins Trophy-winning team, GMP Racing. According to Luis, “we didn’t do anything else to the engine, and the bike runs like hell!”

To match the performance, and the more focused riding position, the guys also tuned the suspension. The front’s been setup to match the riders weight and preferences, and there’s a new Bitubo setup at the rear.

Track Day Teaser: custom Ducati GT 1000 by Maria Motorcycles.
All that was left to do, was give the GT 1000 a suitable livery. “Our major objective was to create a racing design, but with glamour and style. Kind of a new take on the concept of sponsor stickers and racing stripes.”

After mulling over more than twenty designs, the crew settled on the black, white, red and blue scheme you see before you, and christened the bike “Bloody Fang.”

Track Day Teaser: custom Ducati GT 1000 by Maria Motorcycles.
We reckon it’ll turn heads—and break hearts—at the next track day.

Maria Motorcycles website | Facebook | Instagram

Track Day Teaser: custom Ducati GT 1000 by Maria Motorcycles.