Categories
Full-Face Helmet Reviews Gear Reviews Motorcycle Helmet Reviews Other Motorcycle Blogs review Vemar Web Bike World

Vemar Ghibli Hands-On Review

The Ghibli is the second Vemar helmet I’ve reviewed. The first, the Sharki modular, is a pretty good value modular for the money. The Ghibli is an inexpensive full-face helmet, with an MSRP of $139. That is a very appealing price, especially for new riders that are still getting their bearings. Upon arrival, the first question I asked was “is it as good of a value helmet as the Sharki? ”

To test the Ghibli, my wife Melissa wore it throughout the Summer, giving us a pretty good perspective on what the Ghibli is all about.

Features

  • DOT & ECE 22.05 certified
  • Scratch-resistant visor
  • Removable & washable interior liner
  • Intercom-ready
  • Pinlock- ready
  • Micro-ratchet strap

Colorways

Vemar Ghibli Colorways

You can get the Ghibli in numerous colors, broken down into two designations: base, and warrior. The base colorways feature simpler graphics and have “VEMAR” boldly printed on each side. The warrior colorways look more, ehh, tactical by comparison.

The Ghibli I have here is the #G020 yellow base colorway.

Comfort, Fit, & Functions

Vemar Ghibli Full Face Helmet

Fit & Comfort

The Ghibli is a tight fit in the size medium (as shown here). There isn’t a lot of play, with noticeable snug points right on the crown of the head. According to Melissa, it isn’t uncomfortable, but it’s not as comfortable as other helmets she’s worn (such as the Bell RS-2).

The Ghibli comes in a single shell, so I imagine that larger sizes may also wear smaller than the chart would imply. I recommend a try-on.

One thing the Ghibli has going for it is its weight, which I measured at 3lbs flat and other reviews have pegged between 3 and 3.25lbs. Since I’m using a digital scale it’s important to note that it may not be objectively accurate. AKA: I measured 3lbs, but don’t hold me to that.

Vemar Ghibli Weight

Measurement ambiguity aside, the lightish Ghibli is comfortable to wear for long stretches. This is due to the weight, yes, but also to its aerodynamic shape that slices through the air.

One drawback: there’s no integrated sun visor, making sunglasses your best option (unless you’ve got a tinted visor handy) for daytime riding. This makes an already-tight fit just that much tighter.

Visor & Visibility

Vemar Ghibli Full Face Helmet

The Ghibli has a wide but relatively narrow viewport. Visibility isn’t an issue as you can clearly see a large field of view, but it’s not as expansive as many modern full faces. You’ll see an outline of the interior in your vision, if only just.

Vemar Ghibli Full Face Motorcycle Helmet

The visor on the Ghibli has exactly four positions: closed, halfway open, three-quarters open, and completely open. There is no cracking the visor to let a bit of air in; if you’re opening the visor, it’s at least halfway.

The good news here is that it’s easy to open and close, with a bit of initial resistance in the movement that quickly gives way to a smooth opening. I also like the center placement of the finger holds on the visor; sometimes I get flubbed up on visors that have an asymmetrical layout.

The Ghibli can be equipped with a Pinlock insert for all your anti-fog needs, but it doesn’t come with one.

Micro-Ratchet Strap

Vemar Ghibli Full Face Helmet

Melissa reports that the buckle is both easy to use and comfortable to wear. Operation of the ratchet-buckle is easy and smooth. It feels durable enough and I’m sure will last for many years.

Airflow

Vemar Ghibli Full Face Motorcycle Helmet

Airflow in the Ghibli is fine. There are two adjustable vents on the top of the helmet and one on the chinbar. There are two rear exhaust ports that are always open.

The upper vents do their job and are easy enough to operate; I like that they use raised sliders that can be manipulated while wearing gloves.

What I don’t like is the placement of the chin vent switch on the inside edge of the chinbar, which requires reaching in past the chin curtain to use. This isn’t that big of a deal when you’re at a standstill, but it becomes downright dangerous to attempt while moving. Once open, the chin vent provides plenty of air. Just make sure you aren’t moving when you adjust it.

Noise

Them Ghibli is a loud helmet, especially if you’re coming from a mid-range model from HJC, Shoei, etc. It’s louder than any other helmet I’ve worn this year, including three other modulars (Neotec II, C4, and Sharki) and the Bell RS-2 full-face.

It’s not obscenely loud, but it’s loud. So much so that I wouldn’t bother with an intercom, personally- if you want in-helmet audio/communications, use headphones.

Aesthetics

Vemar Ghibli Full Face Helmet

The Ghibli is a good looking helmet with an aggressive profile. I like the snub-nose design, which tapers sharply from the crown. From the side it looks downright aggressive.

If you get real close you’ll find a few imperfections in the application of the graphics. The Vemar logo on the rear is off-center compared to the rest of the helmet, for example, but it’s not noticeable until you start looking for it.

The plastic trim around the rear exhausts, however, is cheap… and obviously so. It pulls back easily and is only attached at either end. I wouldn’t play with it much as I’m not confident it’d stand up to any abuse.

Vemar Ghibli Full Face Helmet

The plastic trim feeling cheap is a big disappointment since it almost doesn’t even need to be there. I appreciate the aesthetic value it offers, but I’d have rather they found something else vs. include such a finicky piece to the exterior of the helmet.

While the Price is Right, the Ghibli Simply Doesn’t Match Up to Competing Helmets

Vemar Ghibli Full Face Helmet

I struggled with how I wanted to position this review. Make no mistake: where it counts, the Ghibli does its job. It’s safe to wear, amply padded, and lightweight.

But in a world filled with options and numerous other helmets vying for your dollars, it’s hard to recommend the Ghibli over other affordable helmets that simply do a better job. The Scorpion EXO R420, for example, is only $10 more and it’s an objectively superior helmet. So is the HJC CL-17, which is the same price at $139.

The Ghibli is a great $99 helmet, but a mediocre $140 one.

Pros

  • Micro-ratchet strap
  • Low price @ $140
  • Light
  • Good looks
  • 5-year warranty

Cons

  • Visor only has four positions
  • Annoying placement of chin vent switch
  • Rear plastic trim is poorly secured
  • Some aesthetic blemishes
  • Noisy

Specs

  • Manufacturer: Vemar
  • Price (When Tested): $139
  • Made In: China
  • Alternative models & colors: 10 colorways in total
  • Sizes: XS – XXL
  • Review Date: September 2018

Photo Gallery

The post Vemar Ghibli Hands-On Review appeared first on Web Bike World.

Categories
Gear Reviews Modular Helmet Reviews Motorcycle Helmet Reviews Other Motorcycle Blogs Vemar Web Bike World

Vemar Sharki Hands-On Review

Someone looking for a modular helmet in the $200 range has several options. Notable price comparable helmets in the space include the Scorpion GT920, HJC IS-Max 2, and Bell Revolver EVO. Among them is the Vemar Sharki, a feature-rich modular with solid fundamentals and strong value.

Over the years, Rick, Bruce, and others have covered Vemar helmets pretty well. See more Vemar helmet reviews here.

As with prior Vemar helmets WBW has reviewed, the Sharki gives a lot for not a lot- especially since it’s currently on sale for $112 at VemarHelmetsUSA.com. At that price it is a no-brainer decision if you’re looking for a great flip-up helmet that doesn’t come with a high three-figure price tag. Even at its regular $199 price, it’s still good value.

The Sharki designed to meet the ECE 22.05 standard and is DOT certified.

The helmet I have here is the “Hive” colorway with a glossy finish, and I have to say that between the black and yellow scheme and the hexagonal graphics, it reminds me of “Bumblebee” from the Transformers movie. That’s not a bad thing- I think this helmet looks badass.

Note: image photo gallery at the bottom of the review. Enjoy.

A Brief Introduction to Vemar Helmets

Vemar isn’t a household name in the motorcycling space like Arai and Shoei are, so if you’re reading this thinking “who the heck is Vemar”, I don’t blame you. However, they aren’t the new kids on the block- not by a long shot.

Vemar Helmets, as it is today, came to be in 1992. However, the helmet making division of Vemar – an Italian fiberglass container manufacturer – was established in 1987. With more than 31 years in the space, you can feel confident knowing that Vemar knows a thing or two.

Vemar plays in the value-brand space, following a strategy of providing superior features and qualities at the price points they compete in. As WBW has found in the past, this strategy has worked out well for them.

Exterior Appearance & Finishing

Vemar Sharki Modular Helmet

Smooth lines with subtle accents give the Sharki a sporty appearance without looking too aggressive. Earlier I labeled its looks as “badass”, though not because it’s got scoops and fins a’plenty (it clearly doesn’t), but because it blends what I feel is a timeless shape with a slick looking graphics package.

Vemar Sharki Modular Helmet

The combination of black, yellow, and grey tones elevates its look. The hexagonal graphics are pleasing to the eye and applied well, conveying a sense of depth that doesn’t actually exist. It’s a great effect.

Colorways

This particular colorway is a little polarizing – yellow will do that – but you can have the Sharki in numerous configurations, including both glossy and matte finishes.

Vemar Sharki Modular Helmet

Personally, I’d go for a matt version of the red “Hive” colorway if I could do it all again.

Finishing Quality

For the most part, the Sharki is finished to acceptable standards and looks good. It certainly does from a distance, and it isn’t until you get up close (and nitpicky, as you might be when doing a review, for example…) that you’ll find a few – and only a few – cosmetic flaws.

Vemar Sharki Modular Helmet

It’s hard to see in the above photo, but the angles of the Vemar logo and DOT designation are at slightly different angles.

Vemar Sharki Modular Helmet

This misalignment is so minor that my pointing it out is less of a complaint and more of a “I guess it’s my job to do this” type of observation. I personally only noticed it after combing the helmet inside and out in preparation for this review.

Vemar Sharki Modular Helmet

The same situation also exists with the front logo graphic which, again, is at a slight angle relative to the lines of the visor.

Vemar Sharki Modular Helmet

This one is somewhat more noticeable, and once I saw it, I couldn’t unsee it.

Vemar Sharki Modular Helmet

Lastly, with the visor up I noticed three small folds in the graphic application right at the lip between the graphic and visor cutout. This one is difficult to see, but again, it is there.

Aside from those 3 blemishes, the aesthetic quality is otherwise good. As previously mentioned, the quality of the hexagonal graphics and side branding is high and looks great.

Unless you’re a stickler for perfection, the Vemar Sharki looks great. And, if you are a stickler for perfection, what are you doing shopping for a $200 helmet? Few in this range will deliver on that standard.

Comfort

At 3.81lbs, the Sharki is neither heavy or light. It slots in at #81 on our helmet by weight list, knocking the SCHUBERTH S2 down one slot to #82. Note that I have not yet added the Sharki to the list but will do so soon.

Vemar Sharki Modular Helmet

Above is my fellow Canadian, Jim Pruner (who actually rides in the snow), sporting the Sharki and his recently reviewed Siima Sibirsky Super Adventure Riding Jacket. Jim’s my model of the day since I haven’t got a photo of my ugly mug wearing it.

The cheek pads press slightly against my jawline, but not uncomfortably so. Enough that the helmet feels secure. Side to side movement feels snug, with no unexpected shaking, as does front to back movement.

What I have here is a size large (23.2 – 23.6in / 59 – 60cm) and it fits me well. Check out Vemar’s sizing guide on MotoSport.com.

Airflow

Vemar Sharki Modular Helmet

On the front of the helmet is a chinbar air intake and two pop-open vents on the left/right side of the top.

Vemar Sharki Modular Helmet

There are two exhaust vents at the rear of the helmet. Combined with the other vents, this makes up the Vemar Klima System (KVS) that is supposed to provide superior airflow and cooling. While I can’t objectively measure whether or not the KVS lives up to its claims (I don’t have a wind tunnel, after all), I can tell you that airflow is indeed quite good.

Visor fog is also minimal, save for when you’re standing still. Excellent airflow, and the integrated breath deflector, work well together to achieve this result.

Ergonomics & Field of View

The visor opening is quite large and does not obstruct. I have no issues enjoying a wide field of vision. Thanks to its relatively light weight, it also is not a chore to look around and enjoy the scenery.

Integrated Sun Visor

Vemar Sharki Modular Helmet

As Jim so handsomely demonstrates, the integrated sun visor is quite large. When fully deployed, it covers the top 8/10’s of my vision, leaving only a small area at the bottom of my field of view without tint. However, it covers 100% of my effective field of vision- everywhere I’m looking is tinted.

Operation of the visor is smooth and precise using the left-side mounted slider. The visor can be partially or completely opened, and stays securely in place wherever you set it.

Integrated Functions

The Sharki comes with a scratch-resistant clear visor, though you can purchase tinted visors as well. The visor is Pinlock MaxVision and is swappable. It detaches easily- simply pull the tab underneath the connection point and the visor pops right off.

Vemar Sharki Modular Helmet

The removable lining is washable (as you’d expect) and is easy enough to get in/out.

Like most modern helmets, the Sharki also comes with easy intercom integration. Vemar has it labeled for the VCS com system, but it’s a universal mount and most com systems will integrate. Certainly, modern com systems from SENA/Cardo/etc. will integrate just fine (though I have not tested this).

The chinbar is also removable should you want some open-faced riding time, not that I recommend it.

A few other line-items on the spec sheet:

  • Visor lock (located on the right side of the visor area)
  • Made from R-3P thermo-polymers
  • D-ring buckle with microlock

In Conclusion

Having spent 8 weeks with the Sharki, I feel that I’ve come to know the helmet well enough to have an informed opinion. It’s objectively good, yes, and it’s low price point makes it all the better. It comes As of today, it’s currently on sale for $112… and at that price it’s an absolute bargain.

Despite minor aesthetic misses, the helmet itself is largely a hit. It’s comfortable to wear, kitted out with the functionality that most riders expect from a modern helmet, and looks great to boot. The Sharki comes with everything you need, including a five year warranty. I wouldn’t let minor graphical blemishes deter you from this excellent helmet.

Pros

  • Comfortable
  • Solid movement for both the chinbar and internal sunshield
  • Snug fit that doesn’t impede your ability to wear glasses if needed
  • Good looking
  • Surprisingly quiet
  • VKS system provides good airflow that keeps you cool and prevents fogging

Cons

  • Minor cosmetic blemishes

Specs

  • Manufacturer: Vemar Helmets
  • Price (When Tested): $112 (on sale, MSRP = $199)
  • Where to Buy: VemarHelmetUSA.com / MotoSport.com / Amazon
  • Made In: Italy (pending confirmation)
  • Alternative models & colors: Matt/glossy finishes – red, black, yellow, white
  • Sizes: XS – XXL
  • Review Date: April 27, 2018

 

High-Resolution Photo Gallery

The post Vemar Sharki Hands-On Review appeared first on Web Bike World.