Categories
BikeExif Bobber Motorcycles Custom Motorcycles Other Motorcycle Blogs Triumph Bobber Triumph Bonneville Triumph motorcycles Triumph T120

Pure and simple: A Bonneville T120 from Central Java

1972 Triumph Bonneville T120 custom
The 21st century motorcycle is a complex beast, crammed with electronics and trick engineering in the name of one-upmanship and regulatory approval.

But there’s something strangely compelling in the simplicity of an older bike from less complicated times. And they don’t come more stripped down than this 1972 T120 from Pitstop Motor Werk.

1972 Triumph Bonneville T120 custom
Pitstop is a team of three led by an Indonesian builder called Agung. They’re based in the hot and humid province of Central Java, and like most Indonesian builders they have to be incredibly resourceful and thrifty. Yet this does not seem to affect the quality of their work.

It helps that Agung has been wrenching on bikes for 20 years now. “I used to get called up by friends to repair their bikes,” he tells us. “Then Pitstop went public about seven years ago. We do engine rebuilds, custom work and restorations.”

1972 Triumph Bonneville T120 custom
This Bonneville is actually a T120R, one of the lesser-known Meriden models. It was an export version of the base bike, and branded as the ‘Bonneville Speedmaster’ by dealers in the USA.

It’s not an especially well-documented model, but the fuel tank was smaller and the bars had a slightly higher bend.

1972 Triumph Bonneville T120 custom
The tubular twin cradle frame also carried the oil, and the 649cc parallel twin pumped out a rorty 50 hp at 6,700 rpm, via classic Amal carburetion. It was enough to comfortably exceed ‘the ton.’

Triumph motorcycles are very thin on the ground in Indonesia, like most other European and American bike brands. So Agung had little chance of finding a complete T120R to work on.

1972 Triumph Bonneville T120 custom
Instead, he imported an engine from the USA, and decided to build a bike around it. He describes his vision as ‘minimalist chopper’ but we’d say it’s just as much a bobber.

Unfortunately, the 47-year-old motor was showing its age, and required a complete rebuild, including a new pushrod and valves. New clutch plates from Barnett went onto the shopping list too, and Agung converted the ignition to CDI while working on the engine.

1972 Triumph Bonneville T120 custom
The exhaust was a much simpler job: two straight shootin’ pipes, one set high and one set low.

The heavy lifting is in the frame, which is entirely hand-made and fashioned from seamless 28mm steel tubing. It’s hooked up to an old school hardtail back end, but the front end is much more contemporary—the forks are from a Kawasaki Ninja 250 and are a surprisingly discreet addition.

1972 Triumph Bonneville T120 custom
They’re topped with compact hand-made Z bars, with an equally compact Bosch headlight nestled up tight against the neck stem.

Agung has kept the brakes traditional, though. The T120R originally used drums, so he’s fitted a BSA A65 assembly to the front, and a vintage Ariel NH350 unit to the back.

1972 Triumph Bonneville T120 custom
The front rim has gone up a couple of sizes from the T120R original to 21 inches, but the rear stays the same at 18. They’re shod with Swallow and Unily tires, popular brands in Southeast Asia that sell mostly vintage patterns.

The delicate bodywork—a tiny peanut tank and a rear fender with a little old school upkick—is hand-made from galvanized steel sheet, and expertly painted in blue and warm grey tones by Danny P of Hacka Pinstriping.

1972 Triumph Bonneville T120 custom
It all harks back to the days when a motorcycle was little more than an engine, a frame, and two wheels.

And much as we love riding modes and ABS and traction control, we still find the charm of a vintage Bonneville custom absolutely irresistible.

What about you?

Pitstop Motor Werk Instagram | Images courtesy of Gastank Magazine | Instagram

1972 Triumph Bonneville T120 custom

Categories
BikeExif Custom Bikes of the Week Custom Motorcycles Other Motorcycle Blogs Triumph Bonneville Triumph motorcycles Triumph T100

Custom Bikes Of The Week: 10 March, 2019

The best cafe racers and custom electric motorcycles from around the web.
There’s something for everyone this week. We’ve got a Bonneville beach cruiser, a pair of high-performance Triumph Speed Triples, and a Ducati Panigale covered in occult symbols. Plus a trio of electric bikes—an old Enfield that traveled the entire length of Britain, and two new concepts designed by Erik Buell. (Yes, he’s back.)

Custom Triumph Speed Triple 'Gemini' by ABM
Triumph Speed Triples by Associated British Motorcycles Tony Scott’s the guy behind the top tuning operation T3 Performance—so he knows how to extract maximum performance out of a machine. These two Speed Triples, the Gemini Naked and Gemini Indianapolis, are the first customs from T3’s new sister brand, Associated British Motorcycles. And they both put a colossal 160 horsepower to the rear wheel.

The Naked (above) is the more ‘cafe’ of the two, with minimal carbon fiber bodywork, and Öhlins and Maxton suspension. It also features HEL brakes, a keyless ignition, and Dymag carbon wheels.

Custom Triumph Speed Triple 'Indianapolis' by ABM
The Indianapolis has a more upright stance, with flat track-inspired lines. Both Geminis have the same tank and belly pan, but the Indy has a number board and a different tail section. And it comes with tubeless Kineo wheels.

ABM will be producing the Gemini in limited numbers—just 50, with customization options like paint and finishing kit. Customers have a choice of ordering a complete bike, or supplying their own donor. It’s a cracking first project for the company, and we’re keen to see what they’ll get up to next. [More]

Custom Triumph Bonneville by Tamarit
Triumph Bonneville by Tamarit At the other end of the Triumph scale is this ultra classic Bonneville, which despite the vintage looks, is actually a 2008 model. It’s the work of Spain’s Tamarit Motorcycles, who built it for a client who wanted a beach hopper for his summers on the Catalonian coast. Jealous yet?

Tamarit stripped the bike down, then had the frame and swing arm chrome plated. They built a new subframe for it, and swapped the OEM seat for a stylish two-piece arrangement. It’s wrapped in leather, and matches the custom tank pads and grips.

Custom Triumph Bonneville by Tamarit
The side covers were shaped to make space for a pair of chunky K&N filters. Everything’s perfectly retro—like the massive fenders, and the pulled-back handlebars. There’s a lot of chrome, a classy paint job, and little brass details everywhere.

Given how old school this Bonneville looks, we’re sure no one’s going to complain about the Firestone Deluxe Champion rubber. Especially since that gorgeous twin exhaust system isn’t hidden under pipe wrap… [More]

Fuell Flow electric motorcycle by Erik Buell
Fuell’s electric motorcycles break cover Do you know what Erik Buell’s been up to since EBR shut down? Designing electric motorcycles, apparently. He’s now the chief technical officer at Fuell (previously VanguardSpark), who’ve just announced their first two concepts.

The ‘Flow’ (above) is a small displacement-equivalent electric motorcycle, while the ‘Fluid’ (left, below) is basically a pedal-assist bicycle. Both have dismal names, but more importantly, both will come in higher- and lower-power models. Meaning that buyers will have the option to buy versions that’ll fall under most countries’ bicycle or moped laws, and therefore not require a license.

Fuell Fluid and Flow electric motorcycles
Early numbers are 15hp (11 kW) and 47hp (35 kW) for the two Flow models. The two Fluid models are equipped with two swappable 490 W h batteries (totaling 980 W h), and a claimed output of 100 Nm.

The Fluid and Flow are currently priced at a MSRP of $3,295 and $10,995, respectively. We can’t say the Fluid excites us much, but the Flow looks like it has potential—and there’s talk of batteries, chargers and wheel motors all being upgradeable. [More]

Custom Ducati Panigale 959 'Pseudoleggera'
Ducati Panigale 959 by Marc Friedman Marc is the parts guy at MotoCorsa, a Ducati dealer in Portland, Oregon. Ever heard the expression “Keep Portland weird?” Well, Marc’s Ducati Panigale 959 embodies it.

Marc started with a 959 Corse, and basically personalized everything—from the ergonomics to the livery. So the Panigale is sporting new clip-ons and Brembo master cylinders, Ducati Performance rear-sets, a Ducabike billet kill switch, and a whole bunch of under the hood changes. (It even has a prototype Akrapovič exhaust).

Custom Ducati Panigale 959 'Pseudoleggera'
But it’s the otherworldly graphics that caught our eye first. Marc wasn’t feeling the stock paint, so he had Bob at Inkknife whip up a custom design. It includes sigils (from ancient occult books that Marc owns), talismans, and sword designs taken from tarot decks. The snake skeleton on the side hints at the bike’s name: ‘Garuda,’ an eastern god that’s the enemy of snakes.

The touches run deep, like the scales on the swing-arm—which were created by polishing it to a brilliant finish, then masking out the design and painting it black. New Church Moto even did a custom seat with the phases of the moon stitched into it (it wasn’t ready in time for these photos). It might not be a traditional custom—but it sure is eye-catching. [Images by Taylor Ramsauer]

1961 Royal Enfield Bullet converted to electric power
Charging Bullet When Brit Fred Spaven stripped down his 1961 Royal Enfield Bullet to refresh it, he discovered that the motor and gearbox were shot. Properly shot. Being an eco-conscious lad, he did the only sensible thing—a full DIY electric conversion.

It’s one of the most endearing EVs we’ve seen. Fred used a Saiette brushed DC motor, and secondhand Nissan Leaf batteries. He also designed a custom subframe to hold it all together, so that he wouldn’t have to hack the Enfield’s stock frame. And that means that this classic can be returned to stock, if the mood strikes.

1961 Royal Enfield Bullet converted to electric power
Fred built custom boxes to house the batteries, battery management system and controller. The total capacity is 6 kWh, with a range of about 40 to 50 miles. Top speed sits at around 60 mph—ideal for scooting around town.

But that’s not all Fred does with the Charging Bullet. Late last year, Fred covered Britain’s 837 mile ‘end to end’ route, from Lands End in Cornwall to John o’ Groats in the north of Scotland. We imagine he must have enjoyed quite a few pub lunches while charging the Bullet along the way—but it still sounds like an awesome trip. [More]

1961 Royal Enfield Bullet converted to electric power

Categories
BikeExif Custom Motorcycles Other Motorcycle Blogs scrambler Triumph Bonneville Triumph motorcycles Triumph Scrambler

Tastemaker: A Scrambler built by the Editor of Meta

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
Ben Giese is a man of exceptional taste. As the creative director and editor-in-chief of the aesthetically superior motorcycle magazine, Meta, he has to be.

But he’s also a rider, who grew up racing motocross. So when his 2017-model Triumph Scrambler went under the knife, both form and function vied for top spot.

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
“I wanted to transform it into a true ‘scrambler‘ that could take me well beyond the paved city streets of Denver, and deep into the mountains and deserts of the Southwest,” Ben tells us. “The goal for the build was to be understated, refined and focused on performance.”

Ben slogged away in his father’s garage for three cold winter months to build his ideal bike. The result is a highly focused scrambler, with a perfect stance and near-Scandinavian levels of minimalism.

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
“I am not a professional bike builder by any means,” he admits. “I’m simply a graphic designer with a vision for what I want, and the tenacity to figure it out. Which means you can do it, too.”

The list of mods on Ben’s Triumph reads like a blueprint for the definitive desert sled. Off-road performance has been cranked up more than just a notch, with Race Tech suspension components at both ends. The rear shocks are custom G3-S units, measuring 1” longer than stock, and the forks have been upgraded with Gold Valve cartridge emulators.

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
Ben’s also fitted larger wheels, more suited to riding dirt. Woody’s Wheel Works in Denver laced up a set of 21F/18R Excel rims for him. They’re wrapped in Shinko SR244 dual sport tires.

The motor’s been left alone, but Ben’s installed a few hop-up bits. There’s a complete air box removal kit from Triumph specialists British Customs, which includes a pair of K&N filters. That’s matched up to their rowdy ‘Shotgun’ exhaust system.

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
There’s even an air injection removal kit from them too; a small mod that removes the stock emissions control, helping the exhaust run cooler and smoothing out the throttle at low revs.

Frame mods include a 6” subframe trim, and a new rear loop for a vintage vibe. Ben’s also shaved off the passenger peg mounts, and added new turn signal tabs.

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
The seat’s a custom unit, shipped over from Down & Out Motorcycles in the UK. Just behind it is a stubby rear fender, along with a Prism Motorcycles taillight on a hand-made mount.

The front light’s a JVB-Moto number, painted black. Just below it is the stock fender, re-mounted on a British Customs high fender bracket. Ben’s hidden the OEM rectifier (which is usually awkwardly placed under the headlight), along with the horn.

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
Up top are a set of vintage MX handlebars, paired with a set of Biltwell Renegade grips and a billet brake reservoir from British Customs. Ben’s swapped the bulky clocks out for a svelte dial from Motogadget, and mounted it just on top of the steering column, in front of the bars.

The last few parts include MX foot pegs and tiny Motogadget pin turn signals. There’s also a new sprocket cover, and a bash plate to stop renegade rocks. And just like the mods, the Triumph’s paint job means business: all black.

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
We’re pretty envious that Ben gets to hoon around on this sled—but it also sounds like he had a good time building it. “I knew this would be an enjoyable and therapeutic project that would get me away from the computer screen,” he says. “But what I didn’t anticipate was the genuine satisfaction I would feel from the entire process.”

“I formed a stronger bond with my bike. It became a part of me more than ever before. Or maybe it was the other way around. Either way, it became more than just something I owned; it became a reflection of myself.”

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine
So, how did the final shakedown go? “Once the overhaul was finally completed,” says Ben, “I headed out to the California desert to put it to the test on the rugged back roads and sand washes of Joshua Tree.”

“The only thing I was looking forward to more than the process of building this bike was actually taking it out and getting it dirty. And it rode like a dream, just like I had imagined.”

Meta Magazine | Instagram | Ben Giese | Images by Dean Bradshaw

Custom Triumph Bonneville Scrambler owned by Ben Giese, editor of Meta Magazine

Categories
BikeExif Motorcycle Reviews Other Motorcycle Blogs Triumph Bonneville Triumph motorcycles

Review: The 2019 Triumph Speed Twin

2019 Triumph Speed Twin review
Most manufacturers have at least a couple of retro-styled motorcycles on sale. But Triumph has more skin in that game than anyone else: Hinckley’s modern classics outnumber their other models by a significant margin.

The new Speed Twin adds yet another name to the roster. So is the range too crowded now, or is the Speed Twin different enough to be significant? I headed to the usually sunny Mediterranean island of Mallorca to find out.

The original 1938 Triumph Speed Twin
The Speed Twin gets its name from the groundbreaking parallel twin that Edward Turner designed [above] back in 1938. But it has far more in common with its current siblings. Think of it as a beefed-up Street Twin; or as a Bonneville with the Thruxton’s performance mindset, sans the café racer styling and ergonomics.

I’ll admit to initially dismissing the Speed Twin as a pointless in-betweener. But as a performance roadster, it actually has a lot going for it.

2019 Triumph Speed Twin review
It’s powered by the ‘High Power’ version of Triumph’s 1,200 cc Bonneville parallel twin motor, with the same tune and compression ratio (11.0:1) as the Thruxton. But Triumph did more than just transplant the Thruxton mill.

There’s a new low-inertia crank and high-compression head. Plus a magnesium cam cover, a new clutch assembly, and ‘mass optimized’ engine covers (basically, they’re lighter). Combined, it makes for a 2.5 kilo (5.5 lbs) weight saving on the motor alone.

2019 Triumph Speed Twin review
Output is the same as the Thruxton R—96 hp and 112 Nm—but it’s how it makes those numbers that’s notable. The torque curve on Triumph’s dyno chart is a thing of beauty. Peak torque is made at 4,950 rpm, but 90 percent of that is already in your hands by 2,500 rpm.

Traction control comes standard (and can be deactivated), along with three selectable riding modes: Sport, Road and Rain. The Speed Twin also features a six-speed box, and Triumph’s easy-to-use ‘Torque Assist’ clutch system. And it only needs its first service at 10,000 miles (16,000 km).

2019 Triumph Speed Twin review
Weight is 196 kg (432 lbs) dry—ten kilos less than the Thruxton, and seven less than the Thruxton R. That’s helped by parts like the new cast aluminum wheels, aluminum frame cradles, an aluminum swing arm, and a lighter battery.

The chassis itself is an adapted version of the Thruxton’s, but with revised geometry. Triumph have stretched it out, with a longer wheelbase, a hair more rake and a few millimeters more trail.

Suspension is KYB all around, with non-adjustable 41 mm right-side-up forks, and preload-adjustable twin rear shocks. When quizzed as to why they didn’t spec the Speed Twin with adjustable suspension, Triumph put it down to cost saving.

2019 Triumph Speed Twin review
They also assured me that the stock suspension would be up to the task, and pointed out that very few customers actually tune their suspension (which, to be fair, is very true). And when I asked if we could look forward to a Speed Twin R with upgraded suspension, they dodged the question. (So I’m betting we can.)

Braking is via twin Brembo four-piston calipers up front, and a single Nissin two-piston caliper at the back, with ABS included. The wheels measure 17×3.5 front and 17×5.0 back, and the Speed Twin comes from the factory with aggressive Pirelli Diablo Rosso 3 tires.

2019 Triumph Speed Twin review
That’s a decidedly modern tire choice for such a classically styled motorcycle, but it’s this blend of old and new that defines the Speed Twin’s styling…and attitude.

It clearly shares DNA with the handsome Bonneville T120—but its stance is way more muscular and aggressive. The two bikes actually use the same 14.5 l fuel tank design, but the Speed Twin has revised mounts to alter its angle.

2019 Triumph Speed Twin review
Items like the twin analogue/digital clocks, stylish Monza-style gas cap and twin upswept exhausts add to the old-school charm. But they’re offset by contemporary design touches, like alloy wheels, an LED daytime running light in the headlight, and a slim LED taillight and turn signals.

2019 Triumph Speed Twin review
The complete package is damn good looking—and that’s not trick photography either. Seeing the Speed Twin in person gave me plenty of time to pore over the finer details, of which there are many. I noted the short, aluminum fenders, the bar end mirrors, and the extra trim on the side covers and throttle bodies; none of those are optional extras.

And yes, there’s a full complement of add-ons available too. Triumph had a parts display bike there, with kit such as brushed Vance & Hines mufflers [below], alternative seats and minor trim parts.

2019 Triumph Speed Twin review
What’s more, Triumph has knocked the build quality right out of the park. Everything feels solid to the touch, with very little plastic in sight. And despite the fact that the Twin is liquid-cooled and packed with modern tech, there’s refreshingly little wiring or plumbing in sight.

I do have one gripe though. For all of the consideration that clearly went into the Speed Twin’s design, the junction between the rear frame, taillight and fender feels like an afterthought. Still, that’s about the only styling fault I could nitpick.

2019 Triumph Speed Twin review
The Speed Twin comes in three colors: Jet Black, Silver Ice and Korosi Red. The silver and red versions were available at the press launch, and both paint jobs were as lush as they come.

What’s more, the graphite coach line surrounding the black graphic on each bike is painted by hand.

2019 Triumph Speed Twin review
The white stripe and Triumph logo aren’t though—they’re just decals, covered by layers of clear coat.

So the Speed Twin stands out from the crowd on specs and aesthetics. But how does it ride? We took a 250 km route through Mallorca’s sprawling countryside and winding mountain roads to find out.

2019 Triumph Speed Twin review
And then it rained. All day. We rode anyway, but with the rain turning the road surface from sketchy to extremely sketchy, I couldn’t really exploit the Speed Twin’s performance or handling.

I did learn that the ergonomics are pretty standout when compared to Triumph’s other twins. The pegs are 38 mm forward and 4 mm lower than the Thruxton’s, making the riding position slightly more relaxed.

2019 Triumph Speed Twin review
But when you combine that with the handlebars—borrowed from the Speed Triple—and the tipped-forward bench seat, it makes for a very engaging riding position. The arrangement pushes your weight forward, over the bike’s center of gravity, and almost forces you to get your elbows out and your head up.

That setup hits the mark for me, even if I did find the seat a little harsh. I wouldn’t hate a little more padding, and a bit more of a step to tuck into. (On the up side, it actually seemed to get more comfortable as the day wore on.)

2019 Triumph Speed Twin review
It also contributes to what is a pretty sweet handling bike. Even at a more cautious pace and with limited grip, I never had to fight the Twin to make it go where I wanted.

Triumph was right about the suspension’s capability too; it never once felt unsettled or outgunned. And when I did push a little too hard—and things started getting random—I could rein it back in.

We weren’t going as slowly as I thought, too. I was following our ex-racer lead rider, and a fearless Brazilian journalist, and our tail rider pointed out afterwards that we were hustling at a pretty respectable pace. Which is a testament to how planted the Speed Twin really is.

2019 Triumph Speed Twin review
It’s also not lacking in grunt. That engine, with its 270 degree firing order, is a total peach—and even the stock cans kick out a pleasing rumble.

Granted, I spent most of the day in Rain mode, but even then I had plenty of usable power at hand, delivered evenly via the ride-by-wire throttle. And the clutch and transmission were both light enough not to tire me out.

It’s worth pointing out here that Triumph’s riding modes each feature their own mix of power delivery, traction control and anti-wheelie control. And that was abundantly clear when we eventually hit a short dry patch, and I flicked the Speed Twin right over to Sport mode.

2019 Triumph Speed Twin review
It immediately went from mellow to rowdy, with a noticeably snatch-ier throttle response, and a front wheel that wanted to lift in both first and second gear. It’s here that the Speed Twin came into its own as a performance roadster, and I’m itching to have another go at it in better weather.

Still, even under the trying circumstances, I found myself riding a bike that was composed, sharp and ultimately fun.

2019 Triumph Speed Twin review
Whether you’re looking at the Speed Twin’s styling or performance, there’s no denying its charisma. So who’s it aimed at?

Triumph are gunning for their own customers as much as they are for new business. Street Twin owners might be looking to upgrade, and might prefer the Speed Twin’s performance roadster vibe to the T120’s laid-back vibe or the Thruxton’s café racer style.

2019 Triumph Speed Twin review
At $12,100 (black) or $12,600 (colors), the Speed Twin’s a fraction pricier than the BMW R nineT Pure ($11,995) and Kawasaki Z900RS ($11,199). And there’s not much between them on weight or performance numbers either.

So I was wrong: the Speed Twin does have a place in Triumph’s line-up: it hits the sweet spot for riders looking for yesterday’s style with today’s performance.

Myself included.

Triumph Motorcycles | Facebook | Instagram | Images by Kingdom Creative

2019 Triumph Speed Twin review

Wes’ gear Shoei RYD helmet | Rev’It! Stealth hoody | Elders Company Arashi gloves | Saint Unbreakable Stretch denims | Stylmartin Red Rock boots

Categories
2LOUD Custom BikeExif Custom Motorcycles Other Motorcycle Blogs Trackers Triumph Bonneville Triumph motorcycles

Sleeper: A subtle Triumph Bonneville from 2LOUD

Sleeper: A subtle Triumph Bonneville from 2LOUD
We’ve profiled 2LOUD’s work for almost two years now. From day one, builder ‘Max’ Yicheng has consistently delivered elegant and harmonious machines from his one-man-shop in Taipei, Taiwan. In fact, his work is so tasteful and restrained, the ‘2LOUD’ moniker borders on ironic.

Those are rare traits in today’s custom world, and they’re why we keep a close eye on Max’s output. And this custom Triumph Bonneville exemplifies the 2LOUD ethos. It’s so subtle that you’d be tempted to pass it over—but look closer, and you’ll discover a host of cracking details and useful upgrades.

Sleeper: A subtle Triumph Bonneville from 2LOUD
It belongs to the same customer that commissioned the first 2LOUD bike we ever featured: a Suzuki TU250. Like the little Suzuki, the 2003-model Bonneville had to be transformed into a stylish street tracker—but without losing too much of its original style.

It also had to fit the owner’s lofty 6’3” frame. So Max has fitted longer-than-stock Öhlins shocks, to lift the rear a touch. He’s kept the original front suspension though, but serviced it and upgraded the oil.

Sleeper: A subtle Triumph Bonneville from 2LOUD
The wheels were swapped out for a set of tubeless spoked items, from Alpina in the UK. The Bonneville’s known for lazy handling, partly thanks to its stock 19” front wheel, so Max has opted for an 18” front matched to a wider (160) rear.

The new rims are wrapped in Pirelli MT60RS tires, chosen for both their look and their grip on varying surfaces.

Sleeper: A subtle Triumph Bonneville from 2LOUD
Max also upgraded the brakes with a full system from the legendary Swedish firm ISR. That included new calipers and discs, and new brake and clutch levers, with integrated handlebar switches.

Moving to the motor, he’s replaced the clutch with a new one from FCC, and installed a full set of new gaskets. The rest of the motor upgrades are external; there’s a pair of FCR37 flatslide carbs, and a British Customs airbox removal kit with K&N filters. It’s matched up to a full exhaust system from SC-Project.

Sleeper: A subtle Triumph Bonneville from 2LOUD
Despite the number of bolt-on goodies, Max’s real strength is with sheet metal. But even here, he didn’t go overboard.

Instead, he’s cut-and-shut the stock Bonneville fuel tank for a slimmer effect, and added a vintage-style seam on top. His attention to detail is sublime—like the drillium front tank mounts, and the hand-made fuel tap.

Sleeper: A subtle Triumph Bonneville from 2LOUD
Other custom pieces include the side covers, and a pair of stubby aluminum fenders. Max also trimmed and looped the subframe, capping it off with a genuine leather saddle that’s just long enough to accommodate two people.

To clean up the cockpit, Max purchased a headlight, with an integrated Motogadget speedo, from the French custom shop BAAK Motocyclettes. (The turn signals came from BAAK too).

Sleeper: A subtle Triumph Bonneville from 2LOUD
New tracker-style handlebars from GOODS in Japan were fitted, along with Biltwell Inc. grips. The handlebar clamps are particularly interesting; they’re a hinged design, CNC-machined to Max’s specification. All of the switch wiring runs inside the bars, making for a super sano setup.

As usual, small hand-made parts like the headlight mount and license plate bracket carry the 2LOUD ‘2’ motif. Final touches include an Evotech bash plate, an LSL sprocket cover, and a tail light from MS Taiwan. Max replaced the chain and sprockets too, for good measure.

Sleeper: A subtle Triumph Bonneville from 2LOUD
Everything’s wrapped up in a livery as subtle as the rest of the bike. It works off a metallic silver base, with sections of green, and punctuated by gold foil pin striping.

Max designed the scheme, then handed it over to Line&Circle Custom Studio to execute. The frame and swing arm were treated to a tough new coat of gloss black.

Sleeper: A subtle Triumph Bonneville from 2LOUD
A stock Bonneville is already an attractive machine, but Max’s version is downright gorgeous. He’s kept the Triumph’s classic appeal, made it look even more retro, and balanced it out with a stacked list of performance upgrades. And he’s done it without vintage tires or even an inch of pipe wrap.

It’s another feather in 2LOUD’s cap—and another reason to keep an even closer eye on this powerhouse shop.

2LOUD Facebook | Instagram

Sleeper: A subtle Triumph Bonneville from 2LOUD

Categories
BikeExif Motorcycle Reviews Other Motorcycle Blogs Triumph Bonneville Triumph motorcycles

The 2019 Triumph Speed Twin revealed: specs and images

The Triumph Speed Twin revealed: specs and images
One of the most famous names in the history of British motorcycling has returned: the Triumph Speed Twin. It first caused a stir in 1938, when Edward Turner’s parallel twin offered unprecedented levels of power for a 500 cc bike.

The original Speed Twin created a template for many other manufacturers to follow, and the lineage is still visible in Triumph’s ‘Modern Classics’ range today.

The Triumph Speed Twin revealed: specs and images
But the new Speed Twin is a very different beast. With 1200 cc and almost four times the horsepower of its predecessor, on paper it’s a cracker.

It’s recognizably a Bonneville, but with a pumped-up, muscular style and a very obvious focus on the riding experience. It’s more than a boulevard cruiser, and is likely to trouble bikes such as the established Ducati Monster and BMW R nineT, and the incoming Indian FTR 1200.

The Triumph Speed Twin revealed: specs and images
The engine is the 1200cc ‘HP’ version of the Bonneville twin, in the same tune as the Thruxton and with the same 11:1 compression ratio. There have been some updates, including a low inertia crank, so it’s not exactly the same as the Thruxton motor.

The cam cover is now magnesium, and the engine cases are ‘mass optimized.’ It’s a new emphasis on weight saving that sees the Speed Twin tips the scales at ten kilos less than the Thruxton.

The Triumph Speed Twin revealed: specs and images
The cooling system is also updated, and the first major service interval is at 10,000 miles (16,000km).

Peak outputs are the same as the Thruxton R: 97PS at 6,750 rpm, with a peak torque of 112 Nm at 4,950 rpm. We’re promised a ‘distinctive British twin sound’ from the pair of black upswept mufflers.

The Triumph Speed Twin revealed: specs and images
Those figures are close to the BMW R nineT, which must be considered the benchmark. The Triumph falls short by some 13 horsepower and 4 Nm, but delivers its peaks much lower in the rev range—suggesting that its power will be more accessible.

The German bike is 220 kg wet, compared to the Triumph’s quoted 196 kg dry. Add on around ten kilos for fuel and a bit more for oil and other fluids, and there’s probably nothing in it.

The Triumph Speed Twin revealed: specs and images
There are the three selectable riding modes—Sport, Road and Rain—and switchable traction control. ABS is obviously standard, although there’s no word on the tech involved here.

The clutch uses Triumph’s familiar ‘Torque assist’ system, which is not a full slipper clutch but instead offers a lighter lever pull for stop-start traffic.

The Triumph Speed Twin revealed: specs and images
Right now, Triumph’s engineers are at the top of the game when it comes to bikes that handle well straight out of the box. On paper the suspension specs seem pretty low key, but we’d be surprised if the Speed Twin wasn’t a sweet handler—especially since Triumph are claiming ‘class leading handling.’

The frame is new, but adapted from the Thruxton R. At the front are 41mm cartridge forks, which are apparently not adjustable. At the back, there’s a conventional twin shock setup with adjustable spring pre-load.

The Triumph Speed Twin revealed: specs and images
Braking is close to the state of the art, with Brembo 4-piston fixed calipers and twin 305 mm discs at the front, plus a 2-piston Nissin floating caliper and single disc on the rear.

The wheels are lightweight 7-spoke cast aluminium jobs, measuring 17 inches both front and back. They’ll be shod with Pirelli Rosso Corsa 3 tires, developed from WSBK technology.

The Triumph Speed Twin revealed: specs and images
It’s quite a departure for the Hinckley Bonneville, which since its rebirth in 2001 has been a rather laidback roadster. But there is a precedent with the Speed Twin: in 1938, intrepid racer Ivan Wicksteed supercharged an early model (below) and lifted the Brooklands circuit speed record with a 118 mph lap.

In 1938, Ivan Wicksteed supercharged this Triumph Speed Twin and lifted the Brooklands circuit speed record with a 118 mph lap.
Despite the decidedly sporting specs of the 2019 Speed Twin, the essential qualities of the Bonneville platform are all present and correct. The riding position is upright, the pillion-friendly bench seat has a low height of 807 mm (just under 32 inches), and the twin instruments are a pleasing mix of analog and digital.

Other niceties include a Monza-style fuel cap, a USB charging socket, a built-in immobilizer for extra security, LED lighting all round and a massive catalog of accessories—including Vance & Hines exhaust systems.

The Triumph Speed Twin revealed: specs and images
The new Speed Twins will start hitting showrooms around the world in Spring 2019. There’s no word on pricing yet, but we do know that three colors will be available. There’s a stealthy Jet Black, plus ‘Silver Ice’ and ‘Korosi Red’—both of which are overlaid with Storm Grey and have hand-painted pinstripes.

The new Triumph will be made available for journalists to road test in January, and we’ll report back then with riding impressions.

Will the Speed Twin live up to the legend? We have a feeling it just might.

Triumph Speed Twin product page | Facebook | Instagram

The Triumph Speed Twin revealed: specs and images

Categories
BikeExif Bunker Custom Cycles Custom Motorcycles Other Motorcycle Blogs Triumph Bonneville Triumph motorcycles

Street Sleeper: Bunker customizes the new Street Twin

Triumph Street Twin custom by Bunker
The pre-2016 Triumph Bonneville is one of the shining stars of the custom scene: a bike that only gets better as you tweak it. And you don’t need a grinder, even for a fairly heavy custom job—there’s a huge network of aftermarket parts suppliers.

The bestselling model in the Modern Classics range is now the ‘new’ liquid-cooled Street Twin. But will it respond to subtle mods as well as its illustrious predecessor? This new low-key build from Bunker Custom Cycles suggests the answer is a resounding Yes.

Triumph Street Twin custom by Bunker
Istanbul-based brothers Can and Mert Uzer are capable of very extensive custom work, but that wasn’t on the cards for this project.

Their client simply wanted a handsome Triumph classic with a matte paint job. And since the Street Twin is the most affordable modern classic in Hinckley’s stable, the Uzer boys picked one up and got cracking.

Triumph Street Twin custom by Bunker
Bunker’s style is marked by good design and impeccable taste. It’s no surprise, given that one brother is a top skateboarder, and the other has a background in digital advertising. So this Street Twin’s stance, proportions and livery are all top shelf.

It’s a bit of a sleeper too, with upgraded suspension propping it up at both ends.

Triumph Street Twin custom by Bunker
The front end’s a plug and play kit from Canyon Motorcycles, which includes Öhlins 43mm FG 621 forks, and a set of CNC machined triples.

Bunker deliberately opted for right-side-up forks, citing their classic look as an overriding factor. There’s a set of Öhlins TR 964 shocks out back too, raising the ride height by an extra centimeter.

Triumph Street Twin custom by Bunker
The spoked wheels are from Triumph’s own catalog; they’re an optional upgrade for the Street Twin’s OEM alloy numbers. Bunker have wrapped them in Pirelli MT60 rubber, adding a small measure of dirt road ability to the Street Twin. And they’ve upgraded the brakes too, with Galfer discs and pads.

Up top, the guys shortened the subframe by 10 centimeters, then set about building a new seat. It’s been shaped on an aluminum seat pan, with a gel insert and a brown leather cover, stitched in a classic tuck-and-roll pattern.

Triumph Street Twin custom by Bunker
Out back, they fabricated a new aluminum fender—then re-used and modified the OEM license plate holder. There’s a new LED taillight, along with a new set of turn signals.

The new front fender is another custom-made piece, and is mounted to the brackets that came with the front-end kit.

Triumph Street Twin custom by Bunker
TEC Bike Parts also came to the party with a number of tasty upgrades. They supplied new mufflers, along with a nifty catalytic convertor eliminator. The handlebars, handlebar clamps and adjustable levers are from their catalog too.

They’re matched to a set of brown Biltwell Inc. grips—but the switches, speedo and headlight are all stock.

Triumph Street Twin custom by Bunker
This Street Twin’s also sporting a few Triumph catalog parts—like the chain guard, and the inspection and ignition covers. The new radiator guard’s a Bunker part though, and will be for sale soon via their website.

There are also a few choice upgrades hiding under the hood. Bunker left the Triumph’s air box intact, but installed a K&N filter and crankcase breather. Then they wired in a new Unibat Lithium-ion battery, and added a Dynojet Power Commander 5 fuel injection module.

Triumph Street Twin custom by Bunker
The bike’s been professionally tuned now, and reportedly pumps out 63.4 hp—almost 10 horses more than stock.

Then there’s Can’s tasty paintwork—a combination of matte silver with gloss black and gold touches. The minimalism is supremely well judged, and gives this Triumph that better-than-factory vibe that Bunker excel at.

Triumph Street Twin custom by Bunker
Oh, and it’s a bit lighter too now. Bunker went to the trouble of weighing every part that came off and went on, and reckon they’ve shaved off almost 12 kilos (25 pounds).

More power, plusher suspension and less heft sounds like a winning combo to us. Who else reckons the Street Twin has a bright future?

Bunker Custom Cycles | Facebook | Instagram | Images by P BLOK/Onur Aynagoz

Triumph Street Twin custom by Bunker

Bunker Custom Cycles would like to thank Tec Bike Parts, Galfer Discs and Evans Coolants for their support.

Categories
BikeExif Custom Bikes of the Week Custom Motorcycles Other Motorcycle Blogs Triumph Bonneville Triumph motorcycles Triumph T100

Custom Bikes Of The Week: 9 September, 2018

The best cafe racers, scramblers and bobbers of the week
A lesson in laying (exhaust) pipe from Taiwan, a BMW K100 called ‘Fifty Shades of Grey’, and a GSX-R750 hiding a little secret under its bodywork. We’re bringin’ sexy back this week.

BMW K100 cafe racer by Deep Creek Cycleworks
BMW K100 cafe racer by Deep Creek Cycleworks What if you really dig the lines and shapes created by the R nine T Racer, but find its protruding pistons to be a bit of an eyesore? Well, you call up the experts at Belgium’s Deep Creek Cycleworks and commission something like this: a K100-powered Racer, dubbed ‘Fifty Shades of Grey.’

‘Bikes Are Made to Ride’ is the mantra of Kris Reniers and his DCC crew. So when a Bavarian brick found its way onto their bench, they decided to make it really fly. The original bodywork was axed and a new, hooped subframe was tacked into place.

BMW K100 cafe racer by Deep Creek Cycleworks
Then it was surmised that the stock tank would line up extremely well with the fairing Ola Stenegärd penned for the R nineT Racer, so modifications were made and mounts were crafted. Sure enough, things look spot on.

In the rear, a new humped tail was created to perfectly match the lines on the subframe and although it sits a touch low for aesthetic perfection, it was crafted this way to enhance ergonomics for an easier tuck. Which the DCC boys decided to evaluate at this year’s Glemseck races, decreeing that Fifty Shades of Grey was an absolute blast. [More]

Triumph Bonneville T100 by Persist
Triumph Bonneville T100 by Persist There’s something about the creative vision coming out of East Asian workshops that the West can’t quite replicate. Peep this lean and mean take on a Bonnie T100 for example. Hinckley’s previous-gen modern classic has been revamped hundreds of times, but few builds have nailed the look and vibe of ‘Kane’ from Persist Motorcycles of Taiwan.

Working in collaboration with Taipei-based Cowboy’s Chopper, Lin Dong and his crew hand-formed sheets of aluminum to create the T100’s compact tank. The new side panels, which sit inboard the revamped subframe, and the tail have also been hand beaten and rolled from the same slices of alloy. The forks have been shortened to deliver a squat stance and the headlight that sits between them was specifically chosen for its resemblance to the Kanji character for ‘eyes.’

Triumph Bonneville T100 by Persist
All of this is contrasted beautifully by the brass-capped swooping, exhaust—with each tube hand bent, no mandrels here. It’s a build style that dips toes in a couple of different waters, but we’re digging it in a big way.

All these changes can be swapped back to stock in no time at all. The Taiwanese government is a bit of a stickler for stock motorcycles, and to ensure Kane gets the nod during mandatory inspections, everything has to be bolt-on. So, when can we put in our order for one of these kits? [More]

Gilles Francru’s Paris Dakar Suzuki DR650
Gilles Francru’s Paris-Dakar Suzuki DR650 For ADV and dual-sport enthusiasts, few events separate the men from the boys (and the bikes from the busted) more effectively than the Paris-Dakar Rally. In 1994, ninety-six motorcycles entered the famed race but only forty-seven would finish—and one Suzuki was in that collection. It was this 1993 DR650, piloted by Gilles Francru.

Sotheby’s had this bike in their ‘Weird and Wonderful Collection’ in London that ran on September 5th. Selling for a bargain £10,800, this period-correct racer wasn’t restored or re-touched in any way.

Gilles Francru’s Paris Dakar Suzuki DR650
In fact, judging by the entry stickers and the odometer, it appears this bike has spent all of its life being tortured on the sand of the Euro-African race. As always, we hope the lucky new owner decides to continue the abuse: even by today’s standards, this would make one hell of an enduro. [More]

Honda CB175 AHRMA racer by Tannermatic
Honda CB175 AHRMA racer by Tannermatic With roots in motorcycle racing, surfing, architecture and boat building, Massachusetts-based Matt Tanner is a modern day renaissance man. And his latest creation, this CB175 powered AHRMA racer, is a breath of classically styled fresh air.

It may surprise you, but this build is basically a bitsa—pieced together from boxes of parts and a rolling chassis. That frame is from a 1964 CB160 and it now runs an extended swingarm and a pair of Hagon shocks to keep the Heidenau race rubber dialed in at the back.

Honda CB175 AHRMA racer by Tannermatic
Up front, a pair of NOS Marzocchi forks were fitted up, after Matt machined the Honda’s triples to suit. The CB175 engine has been tweaked for racing performance and reliability by Frank Gianni, and includes a set of Keihin CR26 carbs and a custom 2-into-1 exhaust system courtesy of John Branson.

Of course, since we’re not seeing it in motion at the track, it’s the tank and bodywork that are stealing the show. Matt wanted to combine styling elements from a multitude of former European racers so he combined fiberglass, aluminum and leather to nail his vision. The seat and fairing were inspired by a Benelli 250 GT Racer, both of which were scaled down to meet the Honda’s smaller proportions. [More]

Suzuki GSX-R750 racing motorcycle by Super8cycles
Suzuki GSX-R750 racer by Super8cycles For street riders, Suzuki and its late 80s ‘Slingshot’ Gixxers pushed the boundaries of GP-style bike performance and design. And those very bikes are now fueling the design trend that may be the Next Big Thing in the custom world.

Michael Vienne is the man behind Super8cycles, a California based shop specializing in this discipline—and this Michael’s own GSX-R750 racer. Built for classic track days, the 2009-era mechanicals are hidden by what seems to be the iconic, slab-sided bodywork of a 1990 Gixxer.

Suzuki GSX-R750 racing motorcycle by Super8cycles
Except that it isn’t. Proportions have changed over 20 years, and classic Gixxers are starting to command a premium. So the fairings you see here are actually from the masters of glass at Airtech Streamlining. Painted in period correct Suzi colors, it looks like the bike I had pinned to my wall many years ago.

To help Vienne outpace other riders on those classic track days, the suspension of his Gixxer has been upgraded at both ends. A rebuilt Öhlins shock handles things out back while Vienne poached an entire front end from his R6 racer. (After some mild machining at the steering stem and a fresh set of bearings, everything slid into place nicely.)

If you find yourself near Willow Springs, chances are good you’ll find Vienne running hot laps, dialing in changes to his setup. Let’s hope he keeps those classic looks. [More]

Suzuki GSX-R750 racing motorcycle by Super8cycles

Categories
BikeExif Custom Motorcycles Other Motorcycle Blogs Restomod Triumph Bonneville Triumph motorcycles Triumph T140

A most distinguished Triumph T140 from Hong Kong

A modified Triumph T140 from Hong Kong, built by Angry Lane
In theory, owning an old Brit bike is a great idea. In reality, your right hand will become more familiar with a Whitworth spanner than the throttle grip.

Of course, you could go out and buy a ‘modern retro.’ But if you want a machine with old school charm and modern reliability, a restomod is an equally valid option.

A modified Triumph T140 from Hong Kong, built by Angry Lane
The owner of this Triumph is a racing driver who chose to go down the restomod route, and he had a clear idea of what he wanted.

Just one hour after buying the T140, he was in the Angry Lane workshop in Hong Kong—run by Guillaume Barras, organizer of the territory’s Distinguished Gentleman’s Ride.

A modified Triumph T140 from Hong Kong, built by Angry Lane
“My client didn’t want to change the bike radically,” says Guillaume. “He just wanted it restored, and made neater and lighter. It needed to be more reliable, and start on the first kick.”

“I said to him, ‘So you want something that Steve McQueen would ride?’ He said, ‘I’d prefer something like Paul Newman would ride!’”

A modified Triumph T140 from Hong Kong, built by Angry Lane
To be precise, the Triumph is a 1977 Bonneville T140 RV. The RV was an export version of the five-speed ‘V,’ with engine modifications to suit the US market. The gear lever was switched to the left-hand side to comply with regulations.

Guillaume describes the bike as ‘virtually new,’ and he’s not exaggerating. The engine was stripped for a complete rebuild with new cylinders and pistons, and new valve gear.

A modified Triumph T140 from Hong Kong, built by Angry Lane
The most frustrating part was preventing leaks from the pushrod tubes—an issue that will be familiar to many T140 owners. After several attempts with different O-rings and guidance from the British Cycle Supply Company, the tubes were finally sealed. (“Special thanks to our British friend Simon Bollix, AKA ‘Grumpy Old Man,’ for rebuilding the engine three times!” says Guillaume.)

There’s a custom 2-into-1 exhaust handmade by New Zealander Paul Bryant, and the carbs have been upgraded to new Amal MKI Premier 932s, with velocity stacks.

A modified Triumph T140 from Hong Kong, built by Angry Lane
To match the added pep from the new engine, Angry Lane have installed a new (and lighter) brake system. Alloy two-piston calipers from AP Racing bite down on floating discs from EBC, and the lines have been replaced by custom hoses from HEL.

The wheels are low-key: black anodized aluminum Sun Rims, with spokes from Buchanans. The hubs have been ceramic-coated black to match, and the tires are Heidenau K60 Scout dual sports: 4.00-18 on the rear, and 100/90-19 on the front.

A modified Triumph T140 from Hong Kong, built by Angry Lane
The fork tubes are original—but everything inside is new, including a set of progressive springs. New triples and risers have been fashioned out of aluminum billet. At the back, there’s a pair of new Öhlins shocks, supplied by the French specialist Mecadata and configured to match the rider’s weight.

The electrics are a mix of old and new. A modern Antigravity lithium battery provides the juice, and there’s an electronic ignition from the New Zealand company Pazon. But there’s also a new high output 12V 3-phase stator-rotor and regulator rectifier from the original Prince Of Darkness, Lucas.

A modified Triumph T140 from Hong Kong, built by Angry Lane
There’s a Motogadget m.unit control box to ensure everything is communicating correctly, and the German company also supplied the bar-end blinkers, the tiny speedo, and the neat circular bar-end mirrors.

They’re attached to classy new bars from LSL, with controls from Renard Speedshop and Kustom Tech—who also supplied the Grimeca 12mm clutch master cylinder and lever. The headlight is a Bates, and the taillight is a Bates-style LED unit supplied by Motone.

A modified Triumph T140 from Hong Kong, built by Angry Lane
The mods to the frame and bodywork are subtle. With the help of friend and welding whizz Tom Lonnen, Angry Lane have shortened the rear of the frame. And the tank has been modified to clamp onto the frame via brackets rather than the original center attachment system.

It’s topped off with a Monza-style gas cap. All the visible nuts and bolts on the Triumph have been replaced with new stainless steel items.

A modified Triumph T140 from Hong Kong, built by Angry Lane
There’s deep and glossy new 2k paint on the frame, tank and fenders. After checking several shades of green, the choice was set on a lovely Mercedes Caledonia Green.

The front fender, believe it or not, is a modified carbon fiber Ducati item. At the back is a much more conventional stainless steel unit from Daytona Japan.

A modified Triumph T140 from Hong Kong, built by Angry Lane
Angry Lane’s specialty is leatherwork, so Guillaume’s brother Ben has created a magnificent ribbed seat wrapped in Italian vegetable-tanned leather. Matching saddlebags are modeled on the design of vintage postbags used in the US.

The right saddlebag even features a USB charging plug, requested by the client, and the left one contains a toolkit. The handgrips, gear shifter, and kick pedal are covered with the same leather.

A modified Triumph T140 from Hong Kong, built by Angry Lane
And yes, the bike now starts on the first kick.

Angry Lane | Facebook | Instagram | Images by Maxime Champigneulle

If you’re in Hong Kong, keep an eye out for Guillaume during the Distinguished Gentleman’s Ride. And no matter where in the world you’re riding, join the Bike EXIF team for a chance to win an incredible $10,000 travel prize.

A modified Triumph T140 from Hong Kong, built by Angry Lane

Categories
BikeExif Custom Motorcycles Other Motorcycle Blogs scrambler Trackers Triumph Bonneville Triumph motorcycles

Well ’ard: Redmax’s ultra rapid Triumph scrambler

Custom Triumph scrambler by Redmax Speed Shop
If you live in the UK and you want a fast street tracker or a well-sorted flat track racer, you call Steve Hillary of Redmax Speed Shop. He’s got a reputation that most builders would kill for—and he builds a mean café racer too.

Steve is an old-school bike nut who spends more time working on his bikes than his website or Facebook page. And it’s not often we get the chance to examine one of his builds closely. But this very fast Triumph street scrambler has made the wait worthwhile.

Custom Triumph scrambler by Redmax Speed Shop
If you went to the Bike Shed show a few weeks ago, you’ll have seen this monster in the metal. Steve built it for a client who already has a Redmax bike in his garage, and wanted a ‘hard as nails’ road bike with an electric start.

“We built Andy my favorite-ever tracker about five years back,” Steve recalls. “It had a Triumph T120 motor in one of our monoshock tracker frames, a serpent-like set of high pipes, and was painted in green with copper accents.”

Custom Triumph scrambler by Redmax Speed Shop
“Everyone was happy—until Andy’s bad leg stopped him kick-starting it!” So Steve suggested building a new bike, using one of Redmax’s new Hinckley Bonneville tracker frames in the shop, designed for electric start engines.

It’s a very light frame, tipping the scales at just 16 kg (36 lbs.) including the swingarm. So Andy agreed, specifying only that the bike would need to work on the motorway and on the trails around his Hampshire home

Custom Triumph scrambler by Redmax Speed Shop
Steve and chief fabricator Glenn Moger got down to work in their Devon headquarters. They slotted an 865cc Bonneville engine (with 270 degree firing interval) into the lightweight frame, and juiced it up with a pair of 38mm Mikuni carbs connected to a quick-action motocross-spec throttle.

The stainless steel 2-into-2 high pipes are terminated with alloy mufflers, which can be re-packed—just like those on enduro bikes from the 80s.

Custom Triumph scrambler by Redmax Speed Shop
The motor looks the part, with finned engine covers in a raw finish imported from the US. Steve then blasted a Motone sprocket cover to match. (“Two k that little lot cost!” he laughs.)

There’s a huge alloy bash plate to protect that essential starter, plus the sump and oil filter.

Custom Triumph scrambler by Redmax Speed Shop
Redmax bikes are always well set-up, and this Triumph is no exception. The forks are fully adjustable Yamaha YZF-R6 items, slotted into billet yokes produced to Steve’s design by the precision engineers at Fastec.

The heavy-duty shocks are from RFY—an eBay favorite with surprisingly good quality, especially if carefully rebuilt.

Custom Triumph scrambler by Redmax Speed Shop
Steve is lucky to have one of England’s best wheel builders just half an hour down the road—Dave Massam. Dave fashioned up a set of alloy rims, powdercoated black, and fitted with stainless spokes.

They’re fitted with Motoz Tractionator Adventure tires, and Steve reckons it’s the first set of this cult rubber to make it into the UK. “They were imported from Australia, and once I saw them, I knew they were the ones. They’re 120 mph rated too—and hard as f–k to fit!”

Custom Triumph scrambler by Redmax Speed Shop
The Brembo brakes have been lifted from a Ducati Monster, fed by fluid from HEL lines and mated to discs and hubs from an Aprilia Pegaso.

Another touch of practicality is in the lighting gear. “We had to have great lights, so we found the biggest rear light we could fit under the Redmax Astro seat, and some high-intensity indicators front and back,” says Steve.

Custom Triumph scrambler by Redmax Speed Shop
A defining feature is the dual-halogen Baja headlamp setup, hand-fabbed in the Redmax shop with a race number board hidden under the leather toolbag. The brown leather was crafted by Glenn, along with the seat pad with a Redmax logo sewn in. The color is matched to the Biltwell grips, which Steve is a fan of.

The super-sleek bodywork comes from the Redmax catalog. “We needed the tank to have plenty of capacity,” says Steve.

Custom Triumph scrambler by Redmax Speed Shop
“Our teardrop large XR alloy tank holds 2.75 gallons (over 10 liters), and is the biggest thing that looks any good on a scrambler / tracker bike. It should supply plenty of juice to the Mikunis fitted on the other end of that fast action throttle!”

The paint on the tank and seat unit was designed to stand out. It’s a Ferrari metallic red (chosen by client Andy), mated to a pearly white chosen by Steve, and laid down by Lee Cockeram at Roosters Voodoo in the port city of Southampton.

Custom Triumph scrambler by Redmax Speed Shop
The rest of the bike is has a thick coat of black powder, which was turned around in just a week by Leighton at West Taunton Powder Coating. (“Yes, one week! They are very thorough too.”)

The electrics are hidden under the seat, powered by a lithium ion battery and controlled by a Motogadget m.unit. Motogadget also supplied the buttons on the Redmax flat track bars, but the digital dash is from Koso. There’s an RFID unit under the seat hump to allow for keyless starting.

Custom Triumph scrambler by Redmax Speed Shop
All that was left was to give the bike a name, and Steve came up with ‘The Knobbler.’ It’s a play on English slang—as in getting ‘knobbled’ if you get hurt. And of course Poms call off-road tires ‘knobblies’ rather than ‘knobbies.’

It’s a subtle reminder that a bike as light and fast as this Triumph can bite if not treated with care.

As Steve says, “You want be the knobbler, not the knobbled!”

Redmax Speed Shop | Facebook | Instagram | Images by Greg Moss

Custom Triumph scrambler by Redmax Speed Shop