Categories
BikeExif Custom Motorcycles Husqvarna motorcycles Ironwood Custom Motorcycles Other Motorcycle Blogs

13 Shades Of Grey: The first custom Husqvarna Vitpilen

The first custom Husqvarna Vitpilen, by Ironwood
The Husqvarna Vitpilen 701 is one of the most attractive OEM motorcycles of recent times. Despite the three-year gap between concept and production, the final road going version of the 701 is damn close to the stunning prototype we were first teased with.

It’s a helluva good ride too; light, punchy and nimble. (Yes, we’ve tested it.) But how do you customize a bike that looks so fine out the box—and has such a definitive look?

The first custom Husqvarna Vitpilen, by Ironwood
The Dutch outfit Ironwood Custom Motorcycles have had a crack at it, and we’re loving the results.

“After seeing the Vitpilen concept at European events, I was intrigued to ride it,” says shop boss Arjan van den Boom. “Or even better, customize it—although it looks so good and balanced already. Luckily for us, a London customer reached out to have his new 701 modded.”

The first custom Husqvarna Vitpilen, by Ironwood
Ironwood’s custom Husqvarna isn’t a total re-imagining of the single cylinder neo-café racer. Instead, it’s a stealthy nip and tuck job—a collection of clever tweaks and subtle changes. Which is exactly what their customer asked for.

“Overall it had to be recognizable as a 701,” says Arjan, “but we had to make it mean and edgy. Keep the key features like the tank with the humps, OEM wheels, speedo and lighting. But change the lines, and make it unique.”

The first custom Husqvarna Vitpilen, by Ironwood
The biggest change is happening out back. The Vitplien 701 is already compact, but Ironwood have shortened the rear end even more.

Arjan’s buddy, Marcel van der Stelt of The Custom Factory, jumped in here. He fabricated a new subframe, and a tray under the seat to hold the wiring and battery.

The first custom Husqvarna Vitpilen, by Ironwood
“It took some effort to get the big wire cluster trimmed down visually,” says Arjan, “because after removing some ugly covers it looked like spaghetti. Most of the wiring loom we kept original, along with the stock battery, which was small and powerful enough already.”

Up top is a custom seat, upholstered in leather by Marcel’s wife Patricia. Just behind it, the crew embedded a pair of LED turn signals into the ends of the frame, and re-mounted the OEM taillight.

The first custom Husqvarna Vitpilen, by Ironwood
There’s some cleanup work happening lower down too. The 701’s plastic rear fender and plate holder combo is gone, replaced by a far slimmer custom-built unit. Equal consideration’s gone into the front, with a stubby front fender and a neat set of brackets replacing the originals.

Subtle trims abound. Both the stock headlight and speedo are still in play, but the latter’s been repositioned ever so slightly. The bars and controls are original, but Ironwood have added Motogadget grips, mirrors and bar-end turn signals.

The first custom Husqvarna Vitpilen, by Ironwood
Lower down, the team ditched the 701’s belly pan, and rebuilt the entire exhaust header. It now terminates in an Akrapovič muffler, originally made for the smaller Husqvarna Vitpilen 401.

The intake’s been changed too, and is now fed via a chunky DNA air filter. It’s a trick design, with the filter actually mounted to the bottom of—and the intake running via—the electronics tray. (Arjan reports that switching out the can and intake had no negative effect on the 701’s performance.)

The first custom Husqvarna Vitpilen, by Ironwood
A final visual hit comes from the 701’s striking new tank graphics. “For the tank design, we collaborated with Lisa from Dutch On Wheels,” Arjan tells us. “We’ve known each other for some years, but never worked together on a project.”

“She has great eye for detail and thinks out of the box on her design, so I was thrilled when my customer asked me to involve a skilled artist for the paint job. It has 13 shades of gray, and resembles a stealth look, like on old war boats.”

The first custom Husqvarna Vitpilen, by Ironwood
Capping off the design are a pair of aftermarket ‘701’ tank badges. And in the final reckoning, the already light Vitpilen has shed around 15 kilos of superfluous bits.

Ironwood are calling this one a ‘neo classic jet fighter,’ and have dubbed it ‘The Chain Smoker.’ Arjan tells us it also perfectly represents Ironwood’s ‘ABCD’ ethos: Aggressive, Bold, Clean and Dazzling.

The first custom Husqvarna Vitpilen, by Ironwood
“Not every build is, or can be, precision engineering, hardcore different, innovative or expensive,” he explains. “It depends on customer budgets, inspiration, time and availability.”

“But for us a custom bike should always be unique, bold and outspoken. The first time you see it online or in the flesh it must blow you away. Only then should ridability, ergonomics, road legality or comfort kick in.”

The first custom Husqvarna Vitpilen, by Ironwood
Well, we think it looks hot. And we want to see more Vitpilen 701 customs. Pretty please?

Ironwood Custom Motorcycles | Facebook | Instagram | Photos by Paul van ML

The first custom Husqvarna Vitpilen, by Ironwood

Categories
BikeExif Husqvarna motorcycles Motorcycle Reviews Other Motorcycle Blogs

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
Husqvarna set the interwebs ablaze when they announced their Vitpilen and Svartpilen 401 concepts four years ago. Then the good news came: these bikes would actually go into production. But would the factory machines be as cool as the concepts?

The answer came last year at EICMA, when Husqvarna revealed the production ready 401s (and 701). It made us very, very happy: never before have we seen production motorcycles stay so true to the original designs. Now, after literally years of anticipation, we’ve finally had a chance to ride the full ‘Pilen range.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
Our friend Cristoph Blumberg of Craftrad magazine has already penned his thoughts on the Vitpilen 701. Now we’re taking a look the 701’s little brothers.

Husqvarna’s new street range references the classic Husqvarna Silverpilen, but that’s more about ideology than looks. Rather than create a ‘modern retro,’ the now-Austrian marque has made a conscious effort to build a different type of contemporary motorcycle.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
The new 401s feel more like one-offs from a top custom shop than factory bikes. (I can’t help but detect shades of Alex Earle’s Ducati Monster tracker.) KTM and Husqvarna send all their design work to industrial design house Kiska, who’ve made their presence felt on the Husqvarna range since it was brought into the KTM fold in 2013.

We’ve ogled photos of the Vitpilen 401 (above) and Svartpilen 401 (below) since day one, and seeing them in the flesh doesn’t disappoint. The lines are clean, the stance of both bikes is flawless, and the finishes are on point.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
Svart and Vit share the same bodywork; a four-piece design that hides the fuel tank and subframe, creating an almost monocoque-like effect. In fact, the two bikes are virtually identical, save for their color schemes and a handful of parts.

The biggest difference is their individual riding positions, and that’s really just down to the handlebars. The Vitpilen has clip-ons mounted directly to its top triple clamp, while the Svartpilen gets higher scrambler-style bars. As for their foot control positions and seat heights (835 mm), those are identical.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
One other distinction is that the Svartpilen’s passenger seat is removable, presumably to fit an aftermarket luggage rack. It also gets a luggage rack on top of the tank, a small bash plate and a unique heat shield on the exhaust. The actual silencer is the same, it’s just finished in black on the Svartpilen, and aluminum on the Vitpilen.

Both bikes share the same LED headlight, front fender and radiator. They also share the same exquisite rear light; a sharp LED unit that tucks neatly up into the tail. The only eyesore is the ‘poop scoop’ behind the rear wheel. But considering it carries the license plate and turn signals (and catches mud), without cluttering that waspish tail section, its execution is admirable.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
There are a couple of other things to nitpick. I dig the digital speedo’s layout and design, and it packs in way more info than you’d expect for a little bike. But the buttons (located on the side of the dial) are really fussy to use. The mirrors look like cheap replacement parts—but my money’s on those being replaced within hours of purchase.

Underneath that hip exterior lurks the motor—and most of the chassis—of KTM’s super popular 390 Duke. The 373 cc liquid-cooled single-cylinder motor is good for 43 hp (32 kW) and 37 Nm, and is managed by a six-speed box and an anti-hopping clutch.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
It also borrows the baby Duke’s killer trellis frame, and the whole package weighs a svelte 150 kg dry (330 pounds). It doesn’t get much heavier fuelled, since the tank only holds 9.5 liters (2.5 gallons). But that’s enough—the 401’s pretty frugal.

Both Husky 401s get 17” wire spoked wheels. On the Vitpilen, they’re wrapped in Metzeler M5 tires; the Svartpilen gets Pirelli Scorpion Rally STRs (just like the Ducati Scrambler Desert Sled).

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
There’s WP suspension at both ends, with 43mm upside down cartridge forks up front. Brakes are from ByBre (a division of Brembo dedicated to smaller capacity bikes), with a 230 mm disc out back and a 320 mm disc in the front. Bosch ABS is standard equipment too.

The KTM 390 Duke is produced in India, but the Husky 401s are put together in Austria. I’m not usually one for debates over where a bike’s built, but the 401 undeniably oozes quality. The primary panels might be plastic, but the surface quality is right up there, with both matte and gloss finishes employed in various places to create a premium effect.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
Many of the other parts are metal, with carefully considered finishes and colors used throughout. Stand out bits include the matching bronzy engine covers and gas caps, and the stunning gripper pattern on each bike’s seat. Overall badging is sublimely subtle too, and the two bikes are tied together by the same yellow striping.

You pay for those luxuries though. A KTM 390 Duke will cost you $5,299 in the USA, but the Vitpilen 401 and Svartpilen 401 cost a grand more, at $6,299.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
So these bikes are drop dead gorgeous, albeit a little pricey. But are they any good as actual motorcycles?

To find out, I wrangled both ‘Pilen 401s from Husqvarna South Africa. Photographer Devin Paisley and I then spent a couple of days hooning around Cape Town, regularly swapping bikes and comparing notes.

When we posted a teaser from our ride to Instagram, user @timmynizzle asked: “Is it a f*ckin ripper?” I couldn’t have summed it up better: it sure is a ripper.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
Look, I’m a big guy. I weigh 250 lbs. before a good braai and measure in at about 6 foot tall. So I typically feel like a bear on a tricycle on smaller bikes. Even though I only just fit on the Vitpilen and Svartpilen 401, it didn’t stop either of them from being a total hoot to ride.

That 373.2 cc power plant is insanely punchy, and the 401 hops off the line with the slightest encouragement. I even managed to put a little air between the front wheel and the tarmac now and then. And it had no trouble getting up to speed—and staying there—on brief highway stints either.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
It’s an enthusiastic little revver too, and spools up so quickly, you’ll be surprised at how soon you’ll need to shift. The response from the ride-by-wire throttle is crisp, and even though the clutch action’s a touch heavy, cycling through the gearbox is a cinch. The exhaust note is just throaty enough to live with it, but I’m dying to hear the burble from the optional Akrapovič unit.

As for handling, the 401 chassis is extremely compact, with a short wheelbase and steep head angle. Plus it’s not all that heavy, so it’s hella nimble and easy to throw around. Point-and-shoot, and the 401 will go where you want it, and come out laughing on the other side.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
The Husky’s WP suspension holds the road well, but it’s very soft under a big guy like me, and it’s not adjustable. That’s really to be expected at this price point—but what really impressed me was how well the ABS-equipped brakes performed.

Then there’s the 401’s ergonomics. Both the Svartpilen and Vitpilen are roomier than they look, and I felt less squished on them than I have on some bigger bikes. The seats are not built for distance though, and I was walking funny after a long day in the saddle. As for passenger accommodations, if your pillion is any larger than my nine-year-old son, neither of you is going to be particularly comfortable.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
The bikes also feel significantly different to ride. I was pleasantly surprised that the Vitpilen’s café racer riding position didn’t completely slaughter me; it did put a little strain on my wrists and back, but it was far less strenuous than I thought it would be.

The Svarpilen is my favorite by a country mile. Its upright, street tracker riding position is not only more comfortable than the Vitplien, but it makes the bike easier to manhandle too. It could be that I just prefer that style of riding, but to me the Svartpilen 401 feels like a BMX with a motor.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
Those Pirelli Scorpion Rally STRs do a pretty good job of sticking to both tarmac and gravel, but you won’t be spending too much time on the latter. I’d happily take Svartpilen on short jaunts on well-graded fire roads, but the overall package is still far too street biased for serious off-roading.

Both 401s are pure hooliganism in two-wheeled form. Devin and I chased each other through twisties and crappy inner city traffic, took shortcuts, hopped curbs and just generally misbehaved all day long.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
Naturally every time we stopped, the Vitpilen and Svartpilen attracted legions of admirers. And that’s really the appeal: Husqvarna has a built a pair of stylish whips that will appeal to more than just motorcyclists. In a market where people see motorcycles as more of a lifestyle accessory than a lifestyle, that’s a good thing.

It’ll be interesting to see how the custom scene gets along with the ‘Pilen siblings. They’re so minimal out the box that there’s not much left to take away. And they look so good, you don’t really want to change anything.

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401
I have a few ideas of what I’d do if I had a Svartpilen 401 in my garage, but most of it’s centered around performance upgrades. And I’d need to stop riding it for long enough to actually wrench on it.

Parked up, the Vitpilen 401 and Svartpilen 401 are striking designs and a fresh perspective on modern motorcycling. On the move, they’re a pair of pint-sized weapons that punch far above their weight. These two get the EXIF seal of approval.

Husqvarna Motorcycles | Facebook | Instagram | Images by Devin Paisley | With thanks to Husqvarna South Africa and Husqvarna Cape Town.

Wes’ gear
Shoei RYD helmet
REV’IT! Stealth Hoody
Velomacchi Speedway backpack
Saint Model 2 jeans

Review: The 2018 Husqvarna Vitpilen and Svartpilen 401

Categories
BikeExif Husqvarna motorcycles Motorcycle Reviews Other Motorcycle Blogs

Review: The 2018 Husqvarna Vitpilen 701

Review: The 2018 Husqvarna Vitpilen 701
We’ve waited so long, and it’s finally here. It was over three years ago, in November 2014, when Husqvarna revealed the Vitpilen 401 concept at the huge EICMA show in Italy. It marked Husqvarna’s return to the street motorcycle segment, and the attention it received was massive.

The angular, fresh design helped: for many, it was a welcome respite from the endless focus on the retro scene. Then a year later, the bigger 701 concept was unveiled: another clean and modern design, built around the 690 Duke engine from sister company KTM.

Review: The 2018 Husqvarna Vitpilen 701
Fortunately, the production Vitpilen 701 is very close to the concept, and the design is stunning in the metal. The tank is a piece of modern art, and so is the tail unit. It’s all very clean and sleek—very Swedish, pure and simple.

This is the DNA of the bike, and its vision too. It was not developed for a specific target group, and there is no stereotype that matches its philosophy. The Vitpilen 701 defines its own segment.

Review: The 2018 Husqvarna Vitpilen 701
After three interminable years from concept to production, the Vitpilen 701 is now available at dealerships in many countries—along with its smaller siblings, the Vitpilen and Svartpilen 401s.

We’ve just ridden the 701 in Barcelona, Spain, and one thing became immediately clear: the riding performance is on the same level as the design. The new Husqvarna is a serious and ‘grown up’ motorcycle, and not just a style item.

Review: The 2018 Husqvarna Vitpilen 701
It’s tempting to underestimate single cylinder bikes, but one shouldn’t. Especially not when the engine is the most powerful street single you can get nowadays. It’s derived from the KTM Duke 690 and delivers 75 hp at 8,500 rpm from 693 cc. It’s also worth noting the Vitpilen’s wet weight of only 166 kilograms, which is easy meat for this engine.

Given those figures and the KTM connection, it’s not surprising that the Vitpilen is fast and very agile. If you are pressing on hard, you’ll need the assistance of the traction control at the exit of the corner because your front wheel might pop up.

Review: The 2018 Husqvarna Vitpilen 701
From 3,000 rpm onward, the bike answers ride-by-wire throttle inputs with a strong punch—thanks to the ample 72 Nm of torque at 6,750 rpm. Happy feelings guaranteed.

It’s a good setup and it’ll put a bright smile on your face. In Swedish Vitpilen means “white arrow” and the moniker fits well.

Review: The 2018 Husqvarna Vitpilen 701
The acceleration is linear—and smoothed out by the twin-spark ignition and a second counter balancer shaft. Having said that, it is a little twitchy under 3,000 rpm. But remember this is a single, so you still want some good vibrations.

The urban playgrounds of Barcelona and the Catalonian backcountry are a good area to test performance, in both city traffic and on twisty roads. The chassis is quite firm, but it’s a dynamic and precise riding experience.

Review: The 2018 Husqvarna Vitpilen 701
It’s super easy to bank the bike quickly from one side to the other, from curve to curve. The 43mm USD forks and monoshock—both from sister company WP Performance Systems—deliver exact feedback. You know exactly what’s going on, but the setup is also stable at speeds of up 160 kph (100 mph) on the highway.

Compression and rebound can be adjusted easily using the clickers on the top of the fork tubes, so you can adjust the suspension for more comfort in the city or a tauter ride on the back roads.

Review: The 2018 Husqvarna Vitpilen 701
The mild angle of the clip-on bars offer an engaging riding position which suits the sporty character of the bike, improving the handling and agility—but they also make it a little tiring during longer rides.

On the technical front, the Vitpilen 701 comes with a quick shifter and auto-blipper, so you can easily shift through the 6-speed ‘box without using the clutch. It works well, especially at higher RPMs. There’s also an APTC™ slipper clutch, which stops rear wheel hop when braking hard into a turn during fast downshifting.

Review: The 2018 Husqvarna Vitpilen 701
The Brembo brakes are up to the job, although there is only one floating 320mm disk with four-piston calipers in the front and a 240 mm rotor at the rear. We wouldn’t describe the braking as super-sharp, but it’s predictable. Advanced riders can switch off the Bosch ABS if they wish.

For a single, the sound through the standard exhaust system is pretty good, especially if you’re accelerating at full throttle. If it’s not loud enough for you, you can improve it with a stunning titanium/carbon muffler from Akrapovič—which adds to the looks of the bike and doesn’t require a remap.

Review: The 2018 Husqvarna Vitpilen 701 Akrapovič exhaust muffler
The seating position is comfortable and feels ‘just right’—even though it’s higher than you’d expect at 830mm. Everything else is where it needs to be, and gives you a good feeling of control.

The headlight is well made and looks very sharp, but the dashboard could have been finished a little better. It’s also not always easy to read the key information fast.

Review: The 2018 Husqvarna Vitpilen 701
Riding with a passenger shouldn’t be a problem, at least not for short distances. The fuel tank holds 12 liters (3.2 gallons) of petrol, and consumption lies somewhere between four and five liters per 100 kilometers.

Depending on your riding style, the effective range should be around 250 to 300 km (150 to 190 miles).

Review: The 2018 Husqvarna Vitpilen 701
To sum up: the Vitpilen 701 is a fun and easy bike to ride. It’s not cheap, but it’s not expensive either. For US$11,999 (or £8,899 or €10,195) you can get one of the most desirable and stylish motorcycles on the market.

It’s a progressive design that fits the modern zeitgeist, with state-of-the-art componentry and engineering—and a dynamic riding experience. Well done Husqvarna. Your white arrow has hit the bullseye.

Road test by Christophe Blumberg | Husqvarna | Facebook | Instagram

Review: The 2018 Husqvarna Vitpilen 701

Categories
BikeExif Custom Bikes of the Week Ducati Scrambler EICMA Honda motorcycles Husqvarna motorcycles Kawasaki motorcycles New Motorcycles Other Motorcycle Blogs

The Bikes from EICMA that you’ll actually be able to buy

The best new motorcycles from the 2017 EICMA show
The motorcycle industry has had its fair share of doomsayers this year, but the EICMA show in Milan was full of fireworks. There were concepts aplenty—led by the Indian FTR1200 tracker, the Honda CB4 Interceptor and the Moto Guzzi V85.

But the production bikes were just as good, and that’s what we’re focusing on now. The six fine machines shown here will be rolling into showrooms soon, and angling after a place in your garage. You have been warned.

Preview: The 2018 Honda CB1000R
Honda CB1000R Honda’s last attempt at a ‘modern classic’ was the CB1100—an honest, attractive machine that failed to set the marketplace on fire, probably due to its portly 540 pound (245 kilo) wet weight. Honda is now attempting to crack the naked market from a different angle, and so we have the 2018 CB1000R.

With streetfighter-tinged styling and a whopping 143 hp on tap, it’s a modern day café racer cleverly designed to appeal to folks who profess not to like café racers. It also sticks pretty close to the Neo-Sports Café concept that Honda revealed last month at the Tokyo Motor Show.

Preview: The 2018 Honda CB1000R
The inline four engine comes from the CBR1000RR, boosted by 20 hp and governed by three throttle maps and a ride-by-wire system. The frame is all new though, and there’s fully adjustable Showa suspension with Big Piston forks up front. Wet weight, we’re told, is 467 pounds—around 212 kilos, a substantial drop on the CB1100. If Honda gets the pricing right on the CB1000R, we reckon they’re onto a winner. [More]

Preview: The 2018 Husqvarna Svartpilen 401
Husqvarna Svartpilen 401 Better late than never: Husqvarna has finally revealed the production Svartpilen, which is slated to go on sale early next year. Based on the KTM 390 Duke, the Svartpilen will compete with the Scrambler Ducati Sixty2, but is likely to be much lighter and peppier. Specs are 44 hp, 37 Nm of torque, a 6-speed gearbox, and 17-inch spoked wheels shod with Pirelli Scorpion Rally STR tires. Buyers will also get LED lighting, motocross-style bars, and Bosch ABS that can be switched on or off.

Preview: The 2018 Husqvarna Svartpilen 401
Claimed dry weight is 150 kilos—around 330 pounds—a useful 17 kilos (37 pounds) lighter than the Sixty2. The Svartpilen (and the Vitpilen sister model) will initially be produced at the KTM plant in Mattighofen, Austria, and later at the Bajaj factory in Pune, India. [More]

Preview: The 2018 Husqvarna Vitpilen 701
Husqvarna Vitpilen 701 The café racer twin to the Svartpilen urban scrambler. It’s powered by the same engine as the KTM 690 Duke, but will also available be available in 401 guise—with the smaller 390 Duke motor. Again, Husqvarna have got the styling absolutely spot on, and haven’t strayed too far from the concept revealed exclusively on Bike EXIF three years ago.

Preview: The 2018 Husqvarna Vitpilen 701
Outputs are a healthy 72 Nm of torque and 75 hp, which are slightly better figures than the Scrambler Ducati Café Racer. It looks like the Vitpilen will also be around 16 kilos (33 pounds) lighter than its Italian competitor. Key specs are Brembo brakes, Bosch 9M+ two-channel ABS (disengageable), a slipper clutch, and fully adjustable suspension made by WP, with 43mm USD forks. [More]

Preview: The 2018 Kawasaki Z900RS Café
Kawasaki Z900RS Café Well, we didn’t expect this. Kawasaki’s tribute to the original Zed took the Tokyo Motor Show by storm last month, but there was a lovely little surprise for EICMA visitors: a café version with a bikini fairing, a humped seat and drop-style bars for a slightly more aggressive riding position.

The mechanical specs are the same as the base model—save for a slight weight increase. But the green-and-white livery and café racer style may give pause to folks thinking of buying the Yamaha XSR900 or Triumph Thruxton. The Thruxton’s 1200cc engine has around 13 Nm more torque, but the peakier Z900RS has around 14 more horses. Weight is likely to be virtually identical.

Preview: The 2018 Kawasaki Z900RS Café
Unless Kawasaki manages to snatch defeat from the jaws of victory, the road manners of all the Z900RS models are likely to be superb—so we reckon pricing is going to be a critical factor here for many buyers. [More]

Preview: The 2018 Royal Enfield Interceptor 650
Royal Enfield Interceptor 650 The giant Indian manufacturer revealed not just a pair of new bikes, but also a new engine. It’s a 650 cc parallel twin developed in the UK—sound familiar?—rather than the widely rumored 750. The 270-degree crank is similar to that used in some Triumphs, which should give a satisfying rumble. It’s air cooled too, which means no ugly radiators to hide, but an anemic output of 47 hp and 52 Nm.

The new bikes are more interesting than the engine. We prefer the Interceptor, which has the no-nonsense upright vibe of a 1960s British twin, and is not to be confused with the Honda CB4 concept of the same name. There’s also a Continental GT, which is basically a powered-up version of the 535cc single of the same name that RE has been selling for the past four years.

Preview: The 2018 Royal Enfield Interceptor 650
Both these machines have a chassis designed in the UK by long-time RE collaborators Harris Performance. That means the handling should be good, despite the conventional right-way-up forks and twin shocks. And there’s an upside to the agricultural specs of the new engine: it’ll be easy to tune, just like an old Triumph motor. We’re banking on big bore kits, high compression pistons and hot cams becoming available before long. [More]

Preview: The 2018 Scrambler Ducati 1100
Scrambler Ducati 1100 At first glance, the new Scrambler looks like an 803cc model that’s eaten a few too many Triple Whoppers. In reality, it’s an all-new bike with a new frame, and a retuned version of the 1079cc Monster 1100 L-twin engine.

Specs are much improved. The electronics offer three riding modes, traction control, and cornering ABS. There’s less plastic and more aluminum, which keeps weight down to a creditable 205 kilos (454 pounds). And you get to choose from three models with different handlebars, seats and colors—plus Öhlins suspension on the Sport variant shown here.

The light, easy-going nature of the original Scrambler Ducati will probably be gone, replaced by a riding experience more akin to that of the bigger Monsters. Which is just what many experienced riders will like, so we’re betting this one will be a hit. [More]

Preview: The 2018 Scrambler Ducati 1100

And those are just the bikes from the retro/modern classic/standard segment. There were plenty of other exciting machines on display, including the Arch Method 143, the new mid-size BMW GSs, the KTM 790 Duke, two new Triumph Tigers and the Multistrada 1260 and Panigale V4 from Ducati.

If money were no object, what would you pick?

Categories
BikeExif Husqvarna motorcycles Other Motorcycle Blogs Racing Motorcycles tracker

Hot Single: Suicide Machine Co. x Husqvarna FC 450

Hot Single: The Suicide Machine Company x Husqvarna FC 450
Even if you’re not into flat track, you have to love the style of the machines. The most high profile ‘Twins’—the Harley-Davidson XG750R and the championship-winning Indian FTR750—have an especially appealing neo-classic vibe, which gets us thinking about adding blinkers, license plates and road-legal tires.

In reality, the Twins are far removed from any showroom v-twins. But the 450 Singles class is occupied by modified motocrossers that are relatively close to production spec. And this Husqvarna FC 450, we’d venture to say, is the best looking racer of all.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
It’s from Suicide Machine Company of Long Beach, California, an outfit run by brothers Aaron and Shaun Guardado. They’re famous for high-performance builds that live up to the company motto: “Fast Loud Deathproof.”

“Husqvarna approached us for a build to showcase their latest model, the FC 450,” says Aaron. “They’ve got a strong racing heritage, and given our involvement with flat track, it seemed like a perfect match.”

Hot Single: The Suicide Machine Company x Husqvarna FC 450
Husqvarna is planning to support racers in next year’s series, who’ll be up against the mighty Honda and Yamaha singles. So they tapped the Guardado brothers to prep a 2018-spec FC 450 motocrosser as an exhibition bike.

The Guardados know the drill: they’ve been racing flat track for the past couple years, mostly in the Harley Hooligan Series and the Super Hooligan Series run by Roland Sands and Indian.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
“Coming in stock at over 63 hp, this electric starting, EFI bike is the perfect bike to take to the flat track,” says Aaron. “It’s the ideal platform for us to practice in—and eventually race—the AFT Singles class.”

So how do you turn a motocrosser into a competitive flat track racer? It starts with the suspension.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
“The tracks vary widely in both length and surface, from eighth-mile to full mile, and from soft cushion dirt to hard packed clay,” explains Aaron. “The right suspension set-up is key. The FC 450 comes with WP suspension front and rear. We shortened it to lower the stance of the bike, and tuned it to custom flat track specs.”

The front fork legs are now paired with the Husqvarna’s own adjustable Factory Triple Clamps, so Aaron and Shaun can change the offset as needed. This is crucial for steering response, allowing the bike to turn-in quicker on short tracks or maintain stability on longer tracks.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
Dubya USA built a set of blacked-out flat track wheels to SMCO specs. The stock hubs were thin film ceramic-coated black, then laced up to 19” Excel hoops using black spokes and splined nipples to give it that custom touch.

Dunlop Tires has a contingency program for American Flat Track racers, with two different compounds on offer; SMCO chose DT3s in the ‘medium’ CD5 compound front and rear.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
“The combination of the Excel wheels and Dunlop tires not only looks good, but is also a race-proven combo.”

Getting power down onto the track surface efficiently is a delicate balancing act—and murder on clutches. So Rekluse provided an Auto Clutch Setup and adjustable slave cylinder to allow the lads to find and tune the balance.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
“The Auto Clutch uses the principles of centrifugal force, and automatically engages and disengages based on RPM and traction feedback,” Aaron explains. “It reduces wheel spin at the start and maintains even power transfer in the middle of a turn, without the worry of stalling—or having to modulate the clutch the entire time.”

There’s also a big safety benefit to the Rekluse Auto Clutch: if for any reason the engine stops at speed, the rear wheel will not lock up and cause a potential catastrophe.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
The exhaust system is a stainless stepped pipe from Kully Co Products. “Kully Co builds some of the nicest exhausts out there and is used by a lot of the teams in the American Flat Track series,” says Aaron.

“This exhaust lowered the position of the pipe to underneath the bike, as is usual in flat tracking. It also maintained a nice power band throughout all rpms, and most importantly, has a really nice exhaust note!”

Hot Single: The Suicide Machine Company x Husqvarna FC 450
With most of the mechanical mods for the FC 450 locked in, SMCO turned their focus to the cockpit. “Even if you have the best mechanically set-up bike, it doesn’t meant a thing if the rider can’t be comfortable piloting it.”

“We wanted handlebars that would help rider stability in the straights, and ease of control while sliding up on the tank in turns. ProTaper has a bend for just about every discipline, and we went with their Dirt Track bars.”

Hot Single: The Suicide Machine Company x Husqvarna FC 450
The bars are home to a Motion Pro Rev2 variable rate throttle, an unusual device that can be fitted with different sized reels to change the amount of twist required to open the throttle body.

“Whether you want to accelerate quickly with a small turn of the throttle, or have a longer opening for smooth acceleration, this is a great addition to any bike—on or off-road,” says Aaron.

Hot Single: The Suicide Machine Company x Husqvarna FC 450
Seat covers are obviously critical for race bikes, and the FC 450 is sporting a grippy item from Saddlemen. “It offers enough movement when you want it, but keeps you in place when it matters.”

We’ve always loved the looks of Husqvarna bikes—going right back to the 400 Cross of the 70s—and the Guardados are fans too.

“A clean white frame, white bodywork, black details and touch of blue anodized components … it really came together nicely,” says Aaron. “We’re looking forward to seeing more FC 450s in the paddock—but most of all, getting out and turning laps on this bike!”

We’re betting this Husky has the speed to match its amazing looks. Keep an eye out for it when the next season starts in about five months’ time.

Suicide Machine Co. | Instagram | Husqvarna USA | Images by Patrick Evans

Hot Single: The Suicide Machine Company x Husqvarna FC 450

Categories
BikeExif Custom Motorcycles Deus Customs Husqvarna motorcycles Other Motorcycle Blogs scrambler

King of Kool: A custom Husqvarna FE 501 from Deus Milano

Custom Husqvarna FE 501 by Deus Milano
Nearly forty years after his death, Steve McQueen’s image is still being used to sell everything from motorcycles to T-shirts. But here’s the irony: the classic bikes that we associate with his name today were cutting-edge contemporary at the time.

In the 60s he favored a Metisse Desert Racer, and called it the “best handling bike I’ve ever owned.” By the 70s, he was on the cover of Sports Illustrated and ripping around in On Any Sunday—aboard the ‘new’ Husqvarna 400 Cross.

Custom Husqvarna FE 501 by Deus Milano
The man had impeccable taste, but he valued performance above all. So what would the King of Cool be riding if he were alive today? We reckon the Husqvarna FE 501 would make the shortlist.

The 510cc, single-cylinder enduro weighs in at a paltry 250lbs, with oodles of ground clearance and fully adjustable WP suspension at both ends. Add to that fuel injection, a 6-speed box and an electric starter, and you’ve got a punchy enduro that’ll handle anything you can throw at it.

Custom Husqvarna FE 501 by Deus Milano
On the principle that customs can perform and look classy, we present ‘The Ranger’—a 2014 FE 501 given a mega hit of throwback style, by Deus Milano for a Swedish client.

“It was a long and cold winter the first time I met Peter in Stockholm,” explains shop boss Alessandro Rossi. “After a few beers we decided to turn his Husky into a ‘Deus Husky Rally’.”

Custom Husqvarna FE 501 by Deus Milano
The brief dictated that the bike should be the same blue as Peter’s Range Rover—hence the nickname ‘The Ranger.’ But a paint job was the least of Alessandro’s concerns; the 501 is built compact, so everything fits together just one way. It took Deus a full four months to turn this one around.

It’s now sporting all-new bodywork, starting with a generous, hand-made aluminum fuel tank. Getting the tank to fit right meant adding some mounting tabs, and getting it to work meant incorporating the Husky’s stock fuel pump.

Custom Husqvarna FE 501 by Deus Milano
Sitting behind is a custom leather saddle. It’s perched on a completely new chromoly steel subframe, with a barely visible tray underneath that now holds most of the electronic bits. Deus also fabricated aluminum fenders at both ends, adding a license bracket to keep the bike road legal.

Alessandro wanted to tweak the Husky’s stance ever so slightly, so the wheels have been re-laced on to a pair of Excel rims. The switch took the front wheel down from a 21” to a 19”, while the rear stayed at 18”. Both are now wrapped in Michelin knobbies that will actually serve a purpose.

Custom Husqvarna FE 501 by Deus Milano
Deus wisely left the Husky’s WP suspension alone though, opting just to have the fork legs anodized black, and the rear spring redone in yellow. The frame—and parts of the engine—got a fresh coat of black too.

Everything inside the motor’s still stock, but it breathes a little better thanks to a tailor-made exhaust from SC Project. The airbox has given way to a fat K&N filter, and Deus had to make up a new intake to get it to fit in the space available.

Custom Husqvarna FE 501 by Deus Milano
There’s a new LED headlight up front, held in place by hand-made brackets. The rest of the lighting is all LED too, including a discreetly placed set of Rizoma turn signals. Ariette grips and a Daytona speedo round out the cockpit.

When all was said and done, the guys decked the bike in the requisite blue, capping it off with a cheeky, Husqvarna-inspired ‘Deus’ motif on the tank. “Husqvarna bikes were born in Sweden in 1903,” says Alessandro, “and we are proud today to have a Deus Husky on the streets of Stockholm, ready to face the toughest rally.”

Custom Husqvarna FE 501 by Deus Milano
Kudos to Deus Milano for adding buckets of style to a highly capable machine. Sure, we’d take a showroom stock FE 501 in a heartbeat…but isn’t this even cooler?

Mr McQueen, we’re sure, would approve.

Deus Milano | Facebook | Instagram

Custom Husqvarna FE 501 by Deus Milano

Categories
BikeExif Custom Motorcycles Husqvarna motorcycles Other Motorcycle Blogs

Dual-Sport Dynamite: The Moto Mucci Husqy570

Moto Mucci's Husqvarna TE 570
Dave Mucci popped up on our radar five years ago with his first build, a slinky CX500 that revealed the potential of Honda’s much-maligned V-twin. By his own admission, it was a “low-budget, quick turnaround build”—but it was a hit, and anyone who’s built a CX500 since has undoubtedly pinned it to their inspiration board.

The secret to this success lies in Dave’s background; he’s a trained industrial designer, with a sensational eye. Since building the CX, space in the Moto Mucci studio has been dominated by client work. But he’s finally managed to build another personal bike—with more time, a bigger budget and a head full of new ideas.


Dave’s CX was designed to traverse Chicago’s city streets…but he’s now based in Portland, Oregon, so his needs have changed. The new bike would have to be capable of handling everything from carving canyons to light camping trail duty.

“I gravitate towards minimalism in my design work so the Husqvarna TE 570 made sense,” says Dave. “It was Husqvarna’s no-frills platform; one of the most stripped down modern bikes that’s still street legal. One cylinder with no starter, battery, key, center stand or steering lock.”

Moto Mucci's Husqvarna TE 570
“Aluminum was substituted for steel throughout all major components. Husqvarna even removed the counterbalance on the crank to save weight. The result was a 55hp, 260 pound (118 kilo) package with a water cooled motor…that vibrates like a palm sander.”

With a six-speed transmission it was a trail bike that had legs; something that could pound pavement and fire roads.

Moto Mucci's Husqvarna TE 570
On paper it made sense, but we wouldn’t be writing about it if Dave was satisfied with its stock looks. “In person it wore a shoddy plastic cloak” he says. “With all the shrouds and guards pulled off I was able to start redesigning the bike from its foundation.”

“Husqvarna’s TE trim is geared towards dirt, so I began digitally sketching the blend of on- and off-road capability I was looking for.”

Moto Mucci's Husqvarna TE 570
Dave wanted to push the 2001-model TE over to supemotard territory a bit, so he lowered it and fitted 17” hoops at each end. He then wrapped them in Shinko 705 tires, and upgraded the front brake with a 320mm rotor.

Then it was time for serious changes. “I knew I wouldn’t be using the plastic tank, and didn’t want the added weight of a steel replacement,” he explains. “I sourced an aluminum Husqvarna CR360 tank that had great patina and all the purple.”

Moto Mucci's Husqvarna TE 570
The TE570’s built like a Tetris grid, so swapping out the tank meant that the radiators had to find a new home. Dave got the idea to run a single Mishimoto unit up front, so he designed an arrangement with a stainless guard and two LEDs for lighting.

There’s more engineering trickery out back, with a unique, cantilevered subframe forming the center point of the bike. Dave designed it to move the rider’s center of gravity toward the core of the bike, and to free up the visual space around the rear wheel. “This also provided a major design element many other components could work off,” he explains.

Moto Mucci's Husqvarna TE 570
“The exhaust was tucked up to follow the belly line of the subframe while the tank continued the top line forward to give the bike an aggressive direction. Variations of cool grey and champagne gold were used in place of black to give the bike a bright look.”

Tapping into his industrial design skillset, Dave did everything on paper before tackling the hard graft. “After refining the design direction digitally, the rendering got tacked to the shop wall and I started hashing it out in metal,” he says.

Moto Mucci's Husqvarna TE 570
“I built many components in CAD first, like the subframe and radiator grille. Having detailed dimensions for bend angles and mounting points saved me a lot of trial and error during the fabrication process.”

He’s added several performance mods too. The motor was decked to raise compression a bit, and a Surflex billet clutch fitted to nudge the rotational weight down. Between the stainless steel exhaust and the K&N filter, Dave had to re-jet the Dell’Orto carb to pump more fuel.

Moto Mucci's Husqvarna TE 570
Even lowering the bike was a careful consideration. Custom suspension springs and valving were made to match Dave’s weight, stiffening it up for canyon twisties and lowering the bike four inches in total. “The leftover eight inches of travel is plenty for dirt service roads,” Dave quips.

He’s also adapted and fitted an Öhlins steering damper from a Kawasaki Ninja ZX-10R, and adjustable levers from ASV. The seat was carved from high-density foam, to help reduce the vibrations from the motor, and there’s a smaller rear sprocket to bring the revs down at highway pace.

Moto Mucci's Husqvarna TE 570
With just the right mix of wackiness and raw performance, Dave’s ‘Husqy570’ might be the raddest dual-sport we’ve seen this year. As expected, it’s a total blast to ride too…

“During a 2,000 mile shakedown run around Montana it proved to be a light, nimble, wheelie-machine worthy of our new home in the PNW. Now that my new shop is set up in Portland and my adventure mobile is ready, I can open the queue for customer builds.”

Mark our words: that queue’s going to fill up fast.

Moto Mucci | Facebook | Instagram | Images by Jenny Linquist

Moto Mucci's Husqvarna TE 570
Specifications
1973 Husqvarna CR360 Tank
320 mm EBC front rotor
Suspension lowered 4” with custom springs, pre-load and valving front and rear
Custom subframe
Custom two-into-one stainless exhaust
Custom stainless radiator guard
Surflex billet aluminum clutch basket
Up-jetted and rebuilt Dell’Orto PHM40 carburetor with K&N filter
17” Husqvarna SM450R wheels
Husqvarna SM570R triple clamps
Mishimoto radiator
XVision LED driving pod lights
Supernova LED taillight / turn signals
Kawasaki ZX-10R Öhlins steering damper
ASV adjustable levers
Biltwell Inc. Kung-Fu grips
Custom alcantara and vinyl seat
Shinko 705 tires: front 120/70R17, rear 150/70R17
Decked cylinder head with new valves, guides, rings, and gaskets
40T Rear sprocket
Hammerhead billet shifter
Golan billet fuel valve

Moto Mucci's Husqvarna TE 570

Categories
654 Motors BikeExif Custom Motorcycles Husqvarna motorcycles Other Motorcycle Blogs

Snow Patrol: An ex-military Husqvarna 256 with skis

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
Mention vintage Husqvarna dirt bikes, and the legendary Cross 400 immediately springs to mind. But Johan Nordin of 6/5/4 Motors has managed to get his hands on something even more rare and quirky.

He’s managed to score a Husqvarna 256—a bike that was developed in 1968 specifically for the Swedish defence force. Only a thousand were ever produced, and all of them were sold by the early 80s.

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
Johan’s named the bike ‘Thage,’ after his father. “I built this bike because my dad had one when he did his compulsory military service in the early 1970s,” says Johan. “And I’ve heard a lot of great stories of his winter adventures on the little bike with skis. Now I want to experience the same adventures.”

The 256’s two-stroke engine punches out an earth-shattering 15.4 horses, reined in by a four-speed box. But that’s not the best part: it actually comes with skis. And the operating procedure for the skis is the sketchiest we’ve ever come across…

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
“The skis automatically spring up if they are not pushed down,” explains Johan. “You push them down using your feet.” That makes changing gear difficult—so when the skis are down, you have to shift with a hand-lever that is attached to the gear lever.

“The gear lever is on the righthand side and the rear brake is on the left,” says Johan. “This is so that you can use the clutch with your left hand, and shift with your right.” Got that?

“When using the skis you can also disconnect the front brake cable and reconnect it, so it controls the rear brake instead.”

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
As scary as that sounds, it’s all part of the 256’s charm. Secondhand models are extremely hard to come by: “They’re usually owned by older men who did the mandatory military service back in the early 70s,” Johan tells us. “I guess this bike was the first motorcycle most of them came in contact with… and was also the only fun they had when doing their military service.”

As a result, owners typically hold on tight, and treat their 256s really well. This one was in a great condition when Johan got it; a friend had bought it from an old-timer, with the intention of rebuilding it. “He became a father, so that was the end of that story,” says Johan. “So the bike was just standing, untouched, for a year, before I got to buy it from him.”

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
Like most military-issue vehicles, the Husky was originally very green, and very utilitarian. But Johan and his compadres at 6/5/4 have injected their usual brand of Scandinavian style.

The rear frame’s been lopped-n-looped, and there’s a more compact perch up top. The fenders are new too, but the front retains a lot of the original’s styling.

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
6/5/4 also fitted longer shocks, new drum brakes, and new Maxxis knobbies. Up front are a set of MX bars and grips, with a simple, classic switchgear setup. A small Bates-style headlight and a new LED tail light round out the parts list.

Johan took a look inside the engine’s top-end too, but everything looked mint. So he just fitted new gaskets and fasteners, and carried out a solid carb and clutch service. After much searching, he found the final piece of the puzzle: a decent exhaust system with a properly sized expansion chamber.

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
Naturally, the whole bike’s been given a new lick of paint, from the tank right down to the frame, engine and wheels. It’s a huge improvement over the stock drab, with a pair of killer ‘Thage’ graphics on the tank sending it comfortably over the top.

Still, one burning question remains: what are those skis like to operate?

“To be honest, I haven’t tried this one in the snow yet,” Johan admits. “But my dad has access to the successor of the 256—the 258, with an automatic gearbox—and that one I’ve tried…”

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors
“Even with the automatic gearbox, it takes a while to get used to. So I can’t even imagine how hard it will be to ride the manual 256.”

“I can’t wait to try this one out in the snow though. I guess I’ll have to keep it until next winter!”

Please do. And then send us the pics.

6/5/4 Motors | Facebook | Instagram | Studio photos by Johannes Helje | Outdoor photos by David Gonzalez

Snow Patrol: An ex-military Husqvarna 256 by 654 Motors

Categories
BikeExif cafe racer Custom Bikes of the Week Custom Motorcycles Ducati Hypermotard Honda CB550 Husqvarna motorcycles Moto Guzzi Other Motorcycle Blogs

Custom Bikes Of The Week: 15 January, 2017

The best cafe racers, scramblers and bobbers of the week
Eleven hundred cc of Moto Guzzi muscle from Florida, a cafe’d Ducati Hypermotard from Germany, and proof from Jakarta that the Kawasaki ER6n can be turned into a good looking bike. We’re going global this week.

Honda CB550 by Ripple Rock Racers
Honda CB550 by Ripple Rock Racers My local shop, Town Moto in Toronto, has a tradition of featuring a different motorcycle in their front window every month. Sometimes it’s a new bike, like Triumph’s Thruxton R or a Husky Supermoto, and sometimes it’s a custom—like this very tidy brat/cafe hybrid from Winnipeg’s Ripple Rock Racers.

Working with a Honda CB550, ‘OZ’ is described by RRR’s Kemp Archibald as “Comfortable yet stylish, a simple and clean affair with a performance heart.” To get the old Honda to this state, RRR stripped the donor bike down completely before detabbing the frame and taking the cutting disc to the rear end. A new tray was fab’d up to hide the electrics and deliver a clean triangle beneath the diamond stitched leather seat. A CB650 was robbed of its swingarm and rear wheel for the build, and the tank is a hand-sculpted unit from a later model CB550. On top of the cosmetic changes, RRR also gave the inline-4 a complete rebuild, and built a four-into-two exhaust system capped with snarling reverse-cone megaphones to better enunciate its braaaap. [More]

Moto Guzzi 1100 Sport by Moto-Studio
Moto Guzzi 1100 Sport by Moto-Studio In stock form, the 1100 Sport was a big brute of a motorcycle. With upwards of 90 hp on tap from its iconic transverse V-Twin engine, it was no slouch either. However, it was a touch portly—and muscling one through the twisties is said to have been tricky at times. But that’s nothing that a 40 kilo diet won’t help. Which is exactly what Bruce McQuiston and his team at Miami, Florida based Moto-Studio thought.

When they put this carburetted Moto Guzzi up on the bench the plastics had to go, as well as few other beefy bits. (Rumor has it the OEM loom and wiring weigh in at 6 kilos.) Then Bruce turned his attention to the rear of ‘Stormo 219.’ There are new subframe struts made of machined aluminum, and that exquisitely shaped tail is a carbon fibre unit. Bruce scores huge bonus points for shaping that tail perfectly to match the profile of the tank. From there the carbs were jetted for four extra ponies and most importantly, the gearing was shortened to make this cafe quicker to race. The fit and finish throughout is exemplary and were I to find an 1100 Sport kicking around, I know who I’d call. [More]

Ducati Hypermotard by Garage 667
Ducati Hypermotard by Garage 667 It’s kind of hard to believe that Pierre Terblanche’s Hypermotard is a decade old. The Italian SuMo on steroids continues to set a standard for hooligan machines—while maintaining a characteristic ‘odd-Duc’ vibe.

Terblanche’s styling isn’t for everyone. And if his Motard visuals don’t quite cut it for you, peep this tight cafe conversion from Germany’s Garage 667. Working from an entry level 796 variant, Jochen Diefke has built a cafe racer with a clear focus on performance. The bike’s beak and myriad other plastics had to go, and to nail the modern classic look, the Hyper’s tank was binned as well. In its place sits a unit from a Ducati 1098 that took some extensive modifications to bolt up and flow properly. After adding custom cross-bracing on the subframe, a humped tail and a Harley V-Rod headlight, Jochen hit the bullseye in terms of style. [More]

Kawasaki ER6n by Studio Motor
Kawasaki ER6n by Studio Motor The Jakarta, Indonesia builders are no strangers to this series. They’ve been on our radar since the very beginning. And thanks to some impressive skills and the courage to take on unconventional donors, we’re always pretty chuffed when something new rolls out. This time around they’ve scrambled Kawi’s naked Ninja and man, does it look the business.

Working with a 2013 ER6n the Studio Motor team immediately binned every element of Kawasaki’s polarizing ‘Sugomi’ design ethos. A new seat, tank and set of fenders were hand crafted from steel and shaped to accentuate the bike’s natural stance. A hoop was tacked on out back and then topped with a beautiful, in-house crafted, leather tuck-rolled seat. Rizoma bars put the rider in control and a classic, five-inch headlight replaces the Michael Bay look up front. The entire package shows the versatility of Kawi’s previous generation Ninja chassis and truly earns those Metzeler Enduros it rides on. [More]

James Garner’s 1970 Husqvarna 400 Cross
James Garner’s 1970 Husqvarna 400 Cross When I was a wee lad, my grandfather introduced me to one of my all-time heroes of Hollywood. As Jim Rockford, James Garner was exactly the brand of cool my developing mind needed—and spurred me to seek out works like The Great Escape. Garner was already a four-wheeled racer, but it was during his time filming with Capt. Virgil Hilts that he developed a love for knees in the breeze.

Hitting Bonham’s blocks on January 26, this 1970 Husqvarna 400 Cross is the very same bike that Garner used to race against McQueen at Steve’s Brentwood estate. When new, the 396cc two-stroke would put out 40 hp—not bad for an off-roader that tips scales at a mere 231 pounds (105 kilos). Forty-seven years later, it may have lost a pony or two, but this Championship winning Swede remains a wicked machine. Having direct ties to Garner means this beast will command a premium—but not as much as if it were McQueen’s own machine. [More]

Categories
BikeExif BMW R nineT Concept Motorcycles Custom Motorcycles Ducati Scrambler Honda motorcycles Husqvarna motorcycles Other Motorcycle Blogs Production Motorcycles scrambler Triumph Bonneville Yamaha XSR900

The 11 Best Motorcycles of EICMA 2016

The 11 Best Motorcycles of EICMA 2016
In Milan, the huge EICMA show is finally winding down. It’s the world’s most influential motorcycle showcase, and a barometer for the state of the industry.

This year, the giant halls were chock-a-block with new bike launches from all sectors of the market. Ducati showed the 1299 Superleggera for folks who like to wear one-piece leathers, and the Aerostich brigade got a treat with a whole fleet of new ADV and commuter bikes.

But the center of gravity was the modern-retro scene, with the ‘modern’ part finally catching up with the ‘retro’ part. There were 70s throwbacks a-plenty, but also some intriguing new approaches to stripped-back, classic styling.

These are the 11 bikes that revved our engines the hardest.

Honda CB1100 TR Concept
Honda CB1100 TR Concept We were a little disappointed with Honda’s CB1100 update revealed at the INTERMOT show. But this 70s-styled concept more than makes up for the half-hearted model refresh. The vibe is muscular and vintage—equal parts flat track and superbike—with angular new bodywork.

The suspension is top-shelf Öhlins all round, the wheels are shod with sticky slicks, and the Termignoni exhaust ends with a muffler pointed skywards. There are no plans for production, but the reaction to this concept has been astounding. Let’s hope Honda’s product planners take note and press the Go button.

BMW R nineT Urban G/S
BMW R nineT Urban G/S There are now five variants of the R nineT, and we reckon this is the prettiest of the lot. It’s largely a cosmetic exercise, though, with the emphasis on the ‘Urban’ rather than ‘G/S’ part of the name.

Mechanically, it sits between the ‘Pure’ and ‘Scrambler‘ models, with a 19-inch front wheel, fork gaiters, MX-style pegs and a raised front fender. (It comes specced with alloy wheels, but we reckon it looks better with the optional laced items shown here.) And of course there’s that nose fairing, white paint scheme and gorgeous red seat—all harking back to the original R 80 G/S.

Husqvarna Vitpilen 401
Husqvarna Vitpilen 401 We already knew the Vitpilen was coming. The real news is that the production version does not deviate much from the stunning concept we revealed here exclusively in November 2014.

The bike is based on the KTM 390 Duke, so it should be light and nimble. The post-modern Scandinavian styling is all present and correct, despite the presence of legal mandatories on the EICMA show bikes, like mirrors and license plate holders. The suspension is via WP, and there are four-piston brakes up front with two-channel ABS. The Vitpilen 401 is due to land in showrooms in Fall 2017, but there’s no word yet on US availability.

Husqvarna Svartpilen 401
Husqvarna Svartpilen 401 The Svartpilen is the evil twin of the Vitpilen, a blacked-out doppelgänger with a nod to the current scrambler craze. That means higher bars, knobby dual sport tires, a skid plate and a rather cool luggage rack atop the tank. Granted, it’s more for the show than go, but that doesn’t stop us lusting after it.

Husqvarna Vitpilen 401 Aero
Husqvarna Vitpilen 401 Aero Perhaps conscious that they needed more than just the productionized 401s to create a splash, Husqvarna also dropped a new concept—the show stopping Vitpilen 401 Aero. Like the production models, it’s mostly the work of Maxime Thouvenin of Kiska, the design studio closely aligned with Husqvarna.

For us, the Aero ties with Honda’s TR concept for the Best In Show trophy. It’s pitched as “A compact, single-cylinder ‘Real Street’ bike…a modern interpretation of what a faired bike should look like.”

There’s nothing retro about this design: It’s a 21st century interpretation of the café racer, with strikingly original bodywork. Let’s hope this one makes it into production too, even if it’s only a body kit for the regular Vitpilen.

Triumph Street Scrambler
Triumph Street Scrambler The launch of the new Bonneville range has been hugely successful, but until now there’s been an important piece missing from the jigsaw: the Scrambler replacement. Triumph has now plugged the gap with the reveal of the ‘Street Scrambler,’ and it looks very tasty indeed.

Hard information is scant though, because Triumph is following its now familiar procedure with this launch: show the bike and brief specs, but save pricing, power outputs and specific details for later on. We’re told that the Scrambler shares some basics with the Street Twin, but has a new chassis, a 19-inch front wheel and longer shocks.

Dirt-friendly features unique to the Scrambler include a bash plate, a chunky high mount exhaust, and ABS that can be switched off via the instrument panel. And the passenger seat is removable—with an aftermarket luggage rack available to mount in its place.

Limited edition Yamaha XSR900 Abarth
Limited edition Yamaha XSR900 Abarth Fiat and Yamaha are odd bedfellows, but as anyone who watches MotoGP will know, the relationship is deep and the Yamaha Motor Racing team is actually based in Italy.

We don’t often see the fruit of this relationship on the street, so this limited edition XSR900 is a novelty. Abarth is Fiat’s tuning arm, and its name will appear on 695 of these lightly tricked-out cafe racers. In dynamic terms the XSR900 is as good as it gets, but this model is boosted with a carbon fiber fairing, fender and tail unit, plus special paint and clip-on bars. Mechanically it’s standard XSR900, aside from the sinuous titanium Akrapovič exhaust. No word on pricing yet, but it’ll probably be worth it for the exhaust system alone.

Yamaha T7 concept motorcycle
Yamaha T7 concept EICMA had plenty of fresh new metal to keep dirtbike and ADV fans happy—from the Africa Twin Enduro Sport to the compact BMW G 310 GS. But the most radical machine was the Yamaha T7, powered by the MT-07/FZ-07 twin.

Developed in Europe, the T7 is a true high-ridin’ rally raider with a 21-inch front wheel, and a potential successor to the XT600Z Ténéré. We’re digging the aluminum bodywork, which makes the T7 look like it was designed to blast across the deserts of Tatooine. Expect to see a production variant of this machine in 2018.

Ducati Scrambler Desert Sled
Ducati Scrambler Desert Sled Mercifully, this ‘Scrambler’ is not a badge-engineering exercise. The existing Ducati Scrambler frame has been reinforced, there’s a new swingarm, and—most importantly—there’s now a substantial eight inches of suspension travel. The new seat has added plushness too, and the 19-inch front wheel and Pirelli Scorpion STR tires mean business. Ducati’s Scrambler finally has real purpose—and looks like an absolute blast to ride.

Ducati Scrambler Cafe Racer
Ducati Scrambler Cafe Racer Isn’t that one of the strangest names ever given to a motorcycle? A scrambler that’s also a cafe racer? Semantics aside, it’s a good-looking bike, and one that we’ve wanted to see Ducati produce for a while now. There’s a 17-inch front wheel, clip-ons, a radial master cylinder for the front brakes, and an appealing upkick to the tail. It’s a toss-up whether we’d take this or the new Monster 797, which also uses the 803cc air-cooled engine.

2017 Fantic Caballero
Fantic Caballero The tiny Italian manufacturer punched well above its weight at EICMA with the frankly gorgeous Caballero. The iconic name returns for a model with two styles—flat track and scrambler (shown here)—and three displacements. Yamaha is providing a 125cc motor, with 250 and 500cc engines coming from the Chinese maker Zongshen.

The frames are chrome molybdenum, the forks are adjustable 41mm USDs, and Arrow will be supplying the exhausts. We’re told the bigger-engined Caballeros will hit the showrooms in mid 2017, with the 125 to follow. If the pricing is right, we reckon this will be a hit, despite Fantic’s small network of dealers.

Those are our picks from EICMA 2016—which ones are your favorites?